Compact DC/DC converters save board space
Two new extremely compact isolated DC/DC converters from Dengrove Electronic Components deliver up to 10W from a 1x1-inch footprint, enabling the drive to save board space in equipment such as distributed power architectures, industrial controls and telecommunication equipment.
The RECOM RP10-A and RP10-AW are fully specified, with built-in class-B EMC filters, short-circuit, overcurrent and overvoltage protection, and under-voltage lockout.
No additional external components are required, which not only minimises solution size but also simplifies design and enhances reliability.
Six-sided continuous shielding maximises blocking of radiated noise thereby ensuring coexistence with external noise sources or sensitive equipment.
With nominal input voltages of 12V, 24V or 48V, the RP10-A and RP10-AW allow an input-voltage ratio of 2:1 and 4:1 respectively thereby giving a wide safety margin to handle large supply fluctuations.
Single-output models have standard voltages from 3.3V to 24V, while complementary outputs range from ±5V to ±15V. The voltage can be trimmed over a range of ±10%, and low ripple and noise ensures the stability of powered equipment. The converters have typical efficiency of up to 91%, and no minimum load is required.
All units have 1.6kV isolation giving enhanced safety, are UL 60950-1 certified, and provide extra peace of mind through RECOM’s three-year warranty.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
