Chassis or DIN rail mount converters are fully encapsulated

The fully encapsulated package helps protect the converter from environmental factors often found in industrial applications, in addition to aiding heat dissipation.

According to the company, these highly efficient converters, with model-dependant typical efficiency in the range of 89-92%, run cooler and consume less power compared to other less efficient converters available in the market. The DTE20 measures 96.0x54.0x23.3mm, the DTE40 112.0x63.8x25.6mm and the DTE60 measures 112.0x67.8x38.0mm. Two ultra wide 4:1 input voltage range options are based around nominal 24VDC (9-36VDC) and 48VDC (18-75VDC). Tightly regulated single output voltage options of 5.1, 12, 24 or 48VDC are available across the range, and isolation is rated at 2,500VDC for one minute.

The DTE series can accommodate a wide range of operating temperatures across the extended industrial range from -40 to +85°C. Full power is available up to a minimum of +70°C depending on the model. Compliance to the international safety specification for IT equipment UL/IEC 60950-1 is standard across the range and they all meet the EN55022 Class A limits for both conducted and radiated emissions without the need for any external filtering components.

Protection features such as short circuit, output overload, input under voltage lock-out and output over voltage and a remote on/off capability are standard across the range. Front mounted input and output screw terminal connections provide ease of installation.

The DTE series is available from Farnell, element14, Digi-Key, approved regional distributors, or direct from XP Power and come with a three year warranty.