Accurate power monitoring of multiple loads
Microchip has announced an expansion to its power monitoring IC portfolio with the addition of the MCP39F511N. Capable of providing popular standard power calculations and event monitoring of two electrical loads, this device facilitates system design and reduces system cost of power monitoring wall outlets and smart plugs, power strips, AC/DC power supplies and power distribution applications.
It includes three Analogue-to-Digital Convertors (ADCs) for voltage and two current load measurements, a 16-bit calculation engine, EEPROM and a flexible 2-wire interface.
The MCP39F511N dual channel power monitoring IC facilitates the design of power hungry appliances, machinery and systems as it reduces firmware development and the number of ICs required for power monitoring of multiple loads.
An integrated low drift voltage reference in addition to the 94.5dB of SINAD performance on each current measurement channel allows the MCP39F511N to monitor two current loads with just 0.5% error across a wide 4000:1 dynamic range. The ability to measure active, reactive and apparent power, active and reactive energy accumulation, RMS current and RMS voltage, line frequency and power factor combined with advanced, integrated features allows system designers of high performance devices to reduce bill of materials and reduce time to market.
The MCP39F511N is supported by Microchip’s MCP39F511N Power Monitor Demonstration Board (ADM00706) which is available now, priced at $200. The MCP39F511N is available now for sampling and volume production in a 28 lead, 5x5 mm QFN package.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
