AC/DC power supplies features low acoustic noise

29th June 2017

Lanna Deamer

0 0

Datasheet

The introduction of 700-1,200W models to the QM series of modular AC/DC power supplies has been announced by TDK. The series features low acoustic noise and BF ready isolation. With both medical and industrial safety certifications, the series is suitable for a wide range of applications, including BF rated medical equipment, test and measurement, broadcast, communications and renewable energy applications.

Packaged in a 127x63.3x270mm enclosure, these QM models can deliver 1200W at 180-264VAC and 700W with a wide range input of 90-264VAC. Up to 12 outputs can be configured using single and dual output modules with voltages from 2.8-61.6V. An optional standby/signal module can be selected with a choice of one or two standby voltages (5V, up to 2A and 12V at 1A), unit inhibit or unit enable, an AC Good signal and a PMBus interface.

The units will operate in ambient temperatures of -20 to 70°C, derating the output power and output current by 2.5% per °C above 50°C. The QM operating efficiency is up to 91% and as internal power loss is reduced, a low speed low audible noise fan can be utilised. This provides an enhanced patient/user experience and increased reliability as less dirt and contaminants are drawn into the power supply. The QM series is covered by a seven year warranty.

The units are certified to IEC/EN/UL/CSA 60601-1, ANSI/AAMI ES 60601-1, IEC/EN/UL/CSA 60950-1, is designed to meet IEC/EN 61010-1 and has the CE marking for the Low Voltage and RoHS2 Directives. With an input to output isolation of 4,000VAC (2xMOPPs), 1,500VAC input to ground (1xMOPP) and 1,500VAC (1xMOPP) output to ground, the series can be used in BF rated medical equipment. The QM series has a maximum earth leakage current of 300µA, while still complying with the EN61000-6-3:2007 and EN60601-1-2:2015 (curve B conducted and radiated) emission standards. The units also meet the EN60601-1-2 and EN61000-6-2 immunity standards.

Product selection is optimised and simplified through the use of an on-line configurator, with a choice of output, signals, leakage currents and standby voltages. Once the desired selection has been made, the configurator will automatically produce a short seven digit code for easy order placement.