720W PFC module is ideal for industrial applications

The AIT02ZPFC module presents a near unity power factor to the incoming power line, and generates a typical output of 393 VDC, which is intended for feeding to one or more high voltage dc-dc converters for further down-conversion to the low voltages required by the application. UR Group can supply high performance, low profile ac-dc power supplies with minimal non-recurring engineering costs and fast turnaround by using Emerson’s modular high voltage half-brick and full-brick dc-dc converters.

When fed with a 230 Vac input, the AIT02ZPFC module has a typical power conversion efficiency of 93%; it can deliver up to 1.83 A @ 393 Vdc and achieves a power density in excess of 9.5 watts per cubic cm. The module uses active power factor correction to minimise input harmonic current distortion and ensure compliance with the RTCA/DO-160D avionics standard at 115 Vac at full load, and EN61000-3-2.

A number of built-in control and monitoring functions make the AIT02ZPFC module easy to integrate within a system. Remote-enable and temperature monitoring functions are provided as standard, and the output voltage can be adjusted from 79% to 100% of nominal via a single control pin. Inrush current is limited by an external resistor.

AIT02ZPFC modules are fully encapsulated and have an aluminium baseplate for conduction cooling. They have no minimum load requirement and operate over a wide baseplate temperature range of -20 to +100 degrees Celsius. Input-to-baseplate and output-to-baseplate isolation is rated at 2,700 VDC, and leakage current is held to less than 3 mA at 800 Hz input frequency. The modules are fully protected against over-voltage and over-temperature conditions and carry a full set of international safety agency approvals, including EN60950 TUV and UL/cUL60950.