SPDT analogue switch is designed for multiplexing

19th May 2016

Nat Bowers

0 0

Datasheet

Designed for multiplexing digital or analogue signals, the 74LVC1G3157 SPDT analogue switch has been introduced by Diodes Incorporated. Its low on-state resistance ensures high integrity when routing audio signals, making this switching solution well-suited for a wide range of advanced consumer electronics from cell phones, tablets and e-readers to personal music players, hand-held games, satellite navigation and other audio equipment.

Featuring an on-state resistance of less than 6Ω when operated with a 5V supply, the 74LVC1G3157 enables the routing of input audio signals and can even support output routing in low-power applications. Its typical off-state leakage current of 20nA provides a high degree of isolation, allowing components such as resistors and capacitors to be switched in or out of the signal path for programmable filters or different gain configurations.

The 74LVC1G3157 is designed for a 1.65 to 5.5V power supply range and can handle signal amplitudes between VCC and ground. The control input can be up to 5.5V regardless of VCC and the control pin includes hysteresis to allow for slower input rise and fall times. The X2-DFN1410 package occupies just 1.4mm² of board space, allowing designers to use multiple parts to route multiple signals while the 0.5mm lead pitch eases board assembly. This device is also available in SOT363 package.

The 74LVC1G3157DW-7 in SOT363 package is priced at $0.055 in 3,000 unit single reel quantities. In the X2-DFN1410 package, pricing for the 74LVC1G3157FZ4-7 is $0.075 each in 5,000 unit single reel quantities.