Optoelectronics

SPD module designed for outdoor LED lighting protection

1st February 2018
Lanna Deamer
0

 

The LSP10GIHP series modules provide coordinated protection for most commercially available LED drivers used today, reducing driver failure more effectively than ever before. Lower clamping voltage and surge let-through current ensure greater luminaire protection.

These modules comply with ANSI C136.2-2015 Extreme, ANSI C82.77-5-2015 High Exposure, IEEE C62.41.2 Location Category C High Exposure, and US Dept. of Energy MSSLC Roadway Luminaire Elevated (20kV/10kA, 1.2/50μs-8/20μs) surge immunity standards.

A built-in thermal disconnect provides additional protection against catastrophic failure/fire hazard under varistor end-of-life or sustained overvoltage conditions.

Applications:

  • Roadway, street and traffic lighting
  • Parking garage lighting
  • Wash wall lighting
  • Digital signage
  • Tunnel lighting
  • Flood lighting

LSP10GIHP Series Surge Protection Modules provide robust surge protection for your outdoor/commercial LED lighting fixtures.

Features:

  • Low measured limiting voltage (MLV) and low voltage protection level (Up)
  • 20kA Maximum Discharge Current (Imax) 8/20µs
  • Meets US Department of Energy Municipal Solid State Street Lighting Consortium Specification
  • Meets ANSI C136.2-2015 Extreme Level and ANSIC82.77-5 Category C High (20kV, 10kA combination wave surge) requirements
  • UL 1449 and IEC 61643-11/ EN 61643-11 approved
  • Thermally protected
  • Double-insulated cable wire
  • IP66 rated
  • Series-connected design with built-in LED indication

Click here to read more.

Featured products

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier