Low-end fixture aids optical setting of tools
One thing was in particular focus during the development of the new UNISET-C setting fixture from MAPAL: Simple handling for optical setting and measurement in the entry-level segment. The UNISET-C has a compact design, the tool to be measured is easily accessible. The measuring arm with optical measuring camera and dimmable back-light source can be easily adjusted in the horizontal and vertical to the desired position using a handle.
A sensor controller integrated into the handle activates the laser in the measuring arm when touched. The laser simplifies quick movement to the desired tool position, as the current camera position is always visible as a red light dot.
Fixed tools, in particular, such as solid carbide or PCD tools, can be quickly and easily measured and set using the UNISET-C. The maximum tool diameter is 400 mm, the maximum tool length also 400 mm.
The user-friendly measuring functions of the UNISET software from MAPAL already employed in other setting fixtures have been adapted to the UNISET-C. A greatly simplified operator mode with predefined setting programs for certain tool types makes work easy even for only occasional users of the fixture. Integrated control geometries allow fully automated measurements to be carried out within seconds.
The Balluff system is available as an option for faster calling up or protocolling of tool data. The UNISET software can also be expanded and specially adapted to the customer’s operating conditions.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
