Automotive clock oscillators meet AEC-Q200 & TS16949

All are available with full PPAP documentation from levels one to five and are suited for extreme environments found in typical automotive applications including ABS and airbag sensors, Engine Control Units (ECU), high speed automotive networks and Tyre Pressure Monitoring System (TPMS) receivers.

All of the new models operate over the standard automotive operating temperature range of -40 to 125°C. Frequency stability options can be specified down to ±50 or ±25ppm over the industrial operating temperature range of -40 to +85°C, which covers all applications be it in the engine compartment or in cab. With the increasing need to reduce power, even inside vehicles, the clock oscillators are available in three different voltages, 1.8, 2.5 and 3.3V. Typical current consumption on the 1.8V versions of the IQXO-542 AUTO and CFPS-53 AUTO models is only 3mA.

All models deliver a CMOS output, 15pF load with a rise and fall time of typically 5 to 7ns and the option of a Tri-State function on Pin 1. Low frequencies, such as 1MHz in the 7x5mm or 4MHz in the 2x1.6mm oscillators which are not possible in the same sized packaged quartz crystal, are also available. The highest frequency available is 135MHz in the CFPS-73 AUTO & IQXO-581 AUTO models with the others being typically 50MHz.