Forwarding CAN data via Ethernet

The CAN2LAN router software is available for the DNP-5280 and DNP-5282 embedded device servers from the DIL/NetPC family.  Both modules are based on a 32-bit MCF5282 ColdFire processor from Freescale.  The memory consists of 8MB Flash and 16MB SDRAM.  The available interfaces take the form of two UARTs, one SPI, one I2C, one CAN, one 10/100Mbps Ethernet LAN interface and parallel GPIO signals.  Mechanically, the servers rely on a 40-pin (DNP-5282) or 64-pin DIL format (DNP-5280) with 2.54mm centres.
To enable the software properties to be adapted to a specific environment, the CAN2LAN router software features a user-friendly web-based interface for browser access via an Ethernet LAN.  This can be used to set the parameters and data transfer propertied of thee CAN interface.  In addition, the configuration interface also makes it possible to specify the network behaviour.  For example, the TCP or UDP communication protocols and the relevant port numbers can be configured.