DFI Announces Mini-ITX Embedded Board HR100-CRM Supporting Mobile 2nd Generation Intel® Core i7-2710QE Processor

The graphics and processor cores are integrated on a single monolithic die and
provide Intel® HD graphics support for DVI-I, LVDS and VGA display interfaces. The
32nm Intel® microarchitecture provides higher performance at lower power than
previous generation processors, and includes the first mobile quad-core processor
with an integrated graphics core. Performance is further increased through the
introduction of Intel® Advanced Vector Extensions (Intel® AVX) to the instruction set,
providing acceleration of complex audio, video, and image processing.

In addition, this new platform supports Intel® Hyper-Threading Technology and
improved Intel® Turbo Boost Technology 2.0, which enables each processor core to
handle two instruction threads and dynamically increase the clock speed when all
cores are not fully utilized. This provides increased performance over the previous
generation platform for both multi-core and non-multi-core optimized application
programs. The combination of Intel Hyper-Threading Technology, Intel Turbo Boost
Technology improvements, and the new three-level cache subsystem insures higher
performance at reduced power consumption across a broad-spectrum of embedded
processing applications.

Support is provided for up to 8GB of DDR3 1066/1333 MHz dual-channel system
memory, two Gigabit LAN controllers, Intel® vPro™ technology (including Intel® Active
Management Technology 7.0, Intel® Virtualization Technology, and Intel® Trusted
Execution Technology), and optional Trusted Platform Module (TPM 1.2). The
integrated Intel® HD graphics engine supports six graphics execution units with
dynamic turbo boost to accelerate video processing, and Intel® Clear Video
Technology providing advanced imaging capability for Blu Ray° and other high
definition video processing. The onboard DVI, VGA, and LVDS interfaces support dual
independent display operation.

The HR100-CRM also supports Intel® High Definition Audio with S/PDIF input/output
interface, two Serial ATA ports with speed up to 3Gb/s, two Serial ATA ports with
speed up to 6Gb/s, RAID 0, 1, 5, 10 disk configuration, eight USB 2.0 host controller
ports, and one PCI Express x16 expansion slot (Gen 2).

This embedded Mini-ITX board is ideal for applications requiring a stable
revision-controlled platform such as industrial control automation, digital signage,
kiosk, medical equipment, and gaming embedded applications.

HR100-CRM Features:
Mini-ITX form factor, 170mm x 170mm
Supports 2nd Generation Intel® Core™ i7-2710QE and i5-2510E
processors
Intel® BD82QM67 Platform Controller Hub
Supports Intel® vPro™ Technology features (Intel® Active Management
Technology 7.0, Intel® Virtualization Technology, and Intel® Trusted Execution
Technology)
Trusted Platform Module (TPM 1.2) option
Up to 8GB of DDR3 1066/1333 MHz dual-channel memory
DVI and VGA display interfaces
18/24bit LVDS display interface
2 Gigabit Ethernet LAN ports
2 SATA ports (3Gb/s)
2 SATA ports (6Gb/s)
8 USB ports
6 Serial COM ports (2 RS-232/422/484)
1 PCI Express x16 expansion slot (Gen 2)
Operating Temperature Range 0°C to 60°C