CYP launch range of most flexible HDBaseT Matrix's yet

Pre-configured to work with the CYP PU-507RX or PU-507WPRX HDBaseT receivers, which are powered using the PoE feature from the matrix, both models are supplied with dual removable internal power supplies, allowing for easy inspection and maintenance with zero downtime. Each bank of eight HDMI inputs (2 x PU-16HBT and1 x PU8H16HBT) and two banks of eight HDBaseT outputs are also easily exchangeable were maintenance or replacement required.  This innovative design means that installers can confidently create a sixteen-zone AV Multiroom system with the knowledge that any maintenance will result in minimum disruption for the user. To aid set up and configuration, a DVI output for a local monitor is also included allowing installers to easily test all inputs and outputs, whilst IP control allows for remote access and integration into third party control systems such as DemoPad.

Available now, the PU-16HBT and PU-8H16HBT offers innovative technology to give installers and integrators unparalleled levels of performance and flexibility.

The PU-16HBT and PU-8H16HBT are available now.

Key featurtes include:

• HDMI 2.0, HDCP and DVI complaint
• Supports uncompressed video/audio up to 10.2Gbps
• Common supported resolutions : HDTV: 480i, 480p, 576i, 576p, 720i, 720p, 1080i, 1080p, 1080p24; PC: VGA, SVGA, XGA, WXGA, SXGA, UXGA, WUXGA.
• High Definition Audio supported : Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM (up to 192kHz)
• Uncompressed data transfer over single CAT cable (100m - CAT6/7; 80m - CAT5e)
• Supports RS-232, 2-Way IR, and Manual Selection Buttons
• Supports HDMI input up to 15m 1080p 8bit or 10m 1080p 12bit
• Supports RS-232 for Matrix Control, plus RS-232 pass-through : Third-party devices can be controlled in each zone via RS-232 from the head-end to the receiver, or head-end devices can be controlled via RS-232 from any receiver in any zone.
• Advanced EDID management settings
• Onboard Operating Temperature Diagnostics
• Recall function allows users to save up to 10 pre-configured Input/Output settings
• Supports 3D signals
• Supports full IP control via Telnet or web GUI
• Inputs 
• PU-16HBT – 16 x HDMI [16x HDMI Uncompressed AV and Data]
• PU-8H16HBT – 8 x HDMI [16x HDMI Uncompressed AV and Data]
• 1 x 9pin Dsub [1 x RS-232 Data]
• PU-16HBT - 16 x 3.5mm Stereo mini-jack [16x Infra Red Receiver]
• PU-8H16HBT - 8 x 3.5mm Stereo mini-jack [16x Infra Red Receiver]
• 1 x 3.5mm Stereo mini-jack [1 x IR Propriety Data]
• 1 x RJ45 [1 x IP Control]
• 1 x USB Mini B [1 x Service Port Propriety Data]
• Outputs
• 16 x 3.5mm Stereo mini-jack [16 x Infra Red Emitter]
• 1 x DVI-I [1x Monitor Output DVI-D]
• 16 x RJ45 [1 6x HDBaseT - HDMI & Propriety Data]
• PSU: IEC,24V/1.25A,Redundant PSU
• Dimensions 440mm [W] x 360mm [D] x 130mm [H]
• Net Weight 12000g
• Gross Weight 13100g