Home > Products > Connector block enables quick isolation for electronic housings

Cables/Connecting

Connector block enables quick isolation for electronic housings

7th December 2006

Switchtec Ltd

ES Admin

0 0

Available from specialist distributor Switchtec, Euroclamp’s SVR vertical reversed connector block enables quick, efficient isolation of equipments and circuitry by way of the connector’s clever design that utilises push-in female connections for power and signal terminations. Ideal for electronic housing manufacturers and PCB manufacturers/assemblers, the connectors will also find favour with OEMs, panel builders, CEMs, kitters, and the building automation industry.

In lengths from 2 to 24 poles, the Euroclamp SVR connector blocks are available in a standard flangeless design, or with a flange at each end for surface mounting - for example to a PCB. Although lots of niche applications require it, this latter type of connector is not so readily available from other manufacturers.

When mounted in the base part of an electronic housing, the SVR connector block takes all incoming power and signals wires, so that when the top half of the equipment (the electronics) is lifted off, the male connecting strip is totally isolated. The SVR connector blocks accept standard 5mm pitch male connecting strips, either the vertical or horizontal PCB connector PV/H**-5.00, or the vertical pin strip PVS**-5.00.

With an insulation resistance of 100Mohms, a test voltage of 2kVrms/60s, the connectors are rated at 16A/250V according to EN60998, or 12A/250V to EN61984.

The SVR connector is available as standard in green, but as with all Euroclamp terminal blocks they are also available in red, yellow, blue, orange and black, and other special colours are available upon request.
Euroclamp’s SVR series are CE marked and are fully RoHS compliant while UL CSA and VDE approvals are pending. Along with all Euroclamp products, Switchtec is able to offer the SVR connectors ex stock.