Products
Optimized RF Front-End System Solution Reduces Size, Cost of Wi-Fi Systems
SiGe Semiconductor has announced the SE2559L, an RF front-end module designed to improve integration and reduce cost of Wi-Fi systems compliant to the 802.11b/g specification. The new RF front-end is based on a highly integrated architecture that is about 60 percent smaller than competitive products. With high feature integration, the SE2559L eliminates several external components, allowing manufacturers to reduce the bill of materials cost for 8...
Avago validates its SerDes core in 65 nm CMOS process technology
Avago Technologies has announced it is among the first manufacturers to validate its SerDes core in 65 nm CMOS process technology. This milestone advances the state of SerDes ASIC core design from today's mainstream 90 nm to 65 nm process technology. With over 25 million embedded SerDes channels shipped, Avago extends its leadership position as a supplier of innovative embedded SerDes cores for OEMs building next generation networking, computing ...
New Adapter Provides Power Over Ethernet Solutions For IT, Security And Automation Systems
ThePowerSupplyShop.Co.UK has announced the introduction of the PW130 power over Ethernet (PoE)adapter from Ault. The PW130 is a single-port PoE solution providing simple and fast integration of power and data over a single Ethernet cable. Two output power versions are available with either 15.4W or 20W outputs and offer either EC320 w/ground (C14) or shaver (C8) input receptacles.
Surface-mount clock oscillators and VCXOs available in two weeks (or less)
New from microwave and RF component specialist Link Microtek is a family of surface-mount clock oscillators and VCXOs that not only offer high performance but are available with exceptionally short lead times of typically 2 weeks or less.
80 to 130W Single-Output Open-Frame AC/DC Converter
Powersolve has announced the availability of Astec’s LPS120 Series of open-frame, 5 x 3in footprint switch mode power supplies. Power output is a maximum of 80W (convection) and 130W with 30 CFM forced air cooling. Single DC outputs are 3.3, 5, 12, 15, 24 or 48V and there are additional 5V standby and 12V fan outputs. Input is 85 to 264VAC with active power factor correction.
Radiation Hardened Device for Use in Ultrahigh-Speed Bidirectional Point-to-Point Data Transmission Systems
Texas Instruments has announced the TLK2711HFGQMLV 1.6 to 2.7 Gigabits per Second Serializer/Deserializer. A member of the WizardLink family of multigigabit transceivers, the device is qualified to MIL-PRF-38535 (QML) Class V and is designed to support serial interface in high speed data bus applications for aerospace equipment, such as satellites.
High-Density Flash Memory Added to Extended Temperature Range 16-bit Microcontroller Family
STMicroelectronics has announced four new advanced 16-bit microcontrollers in its industry standard ST10 family (ST10F27x). The new MCUs offer up to 832-kbytes of embedded Flash memory and up to 68-kbytes of RAM, plus other enhancements, while maintaining upward hardware and software compatibility with earlier devices, such as the widely used ST10F168 and ST10F269. The family is one of the few product ranges to combine embedded Flash and the -40 ...
7-inch TFT-LCD module features PC / video input and single supply voltage
Anders Electronics has introduced a 7-inch widescreen TFT-LCD module complete with interface, power sequencing and OSD control already integrated, to ease design challenges and reduce time to market for new products. The complete module is based on a TPO TFT panel and is RoHS compliant.
Multiple-Ouput 25W DC/DC Converter For Use In Vehicles
Designed primarily for use in vehicles, the new V104 from Datasound Laboratories is a PC/104 multiple output DC/DC 25W converter with a wide input range of 8 to 30V (>6:1) and is ideal for battery or unregulated input applications or low voltage AC inputs.
Nine External Power Supply Families Meet ENERGY STAR Requirements
SL Power Electronics Corporation, the company established following the merger of Condor DC Power and Ault, announces new families of external power supplies that meet the EPA ENERGY STAR program requirements. The new product families are in the 6 to 60W power range and are suited to both medical and commercial applications.