TPS92611QDGNRQ1

TL431A-Q1 Automotive Catalog Adjustable Precision Shunt Regulators

CD74HC4051-Q1 Automotive Catalog High Speed CMOS Logic Analog Multiplexers/Demultiplexers

BQ24105-Q1 Automotive Catalog Standalone Synchronous Switch-Mode Li-Ion Charger w/2A FET in QFN-20, 1 to 3 Cell

TPS7A52-Q1 Automotive 2A High-Accuracy Low-Noise Low-Dropout (LDO) Voltage Regulator

LM76003-Q1 Automotive Synchronous Step-Down DC-DC Converter Voltage Regulator Single Output 3.5A 3.5V to 36V 30-Pin WQFN T/R

2.5A 36V Synchronous 2.1-MHz Step-Down DC-DC Converter 3.2V to 10V Output 22-Pin VQFN-HR T/R

IN STOCK SHIP TODAY

The TLIN1029-Q1 is a Local Interconnect Network (LIN) physical layer transceiver with integrated wake-up and protection features, compliant to LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and ISO/DIS 17987–4.2 standards. LIN is a single wire bidirectional bus typically used for low speed in-vehicle networks using data rates up to 20 kbps. The TLIN1029-Q1 is designed to support 12 V applications with wider operating voltage and additional bus-fault protection. The LIN receiver supports data rates up to 100 kbps for in-line programming. The TLIN1029-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake-up via LIN bus or pin. The integrated resistor, ESD and fault protection allows designers to save board space in their applications.

Features:

• AEC-Q100 Qualified for Automotive Applications
  • Device Temperature: –40°C to 125°C Ambient
  • Device HBM Certification Level: ±8 kV
  • Device CDM Certification Level: ±1.5 kV
• Compliant to LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and ISO/DIS 17987–4.2
• Conforms to SAEJ2602 Recommended Practice for LIN
• Supports 12 V Applications
• LIN Transmit Data Rate up to 20 kbps.
• Wide Operating Ranges
  • 4 V to 36 V Supply Voltage
  • ±45 V LIN Bus Fault Protection
• Sleep Mode: Ultra-Low Current Consumption Allows Wake-Up Event From:
  • LIN Bus
  • Local Wake up through EN
• Power Up and Down Glitch Free Operation
• Protection Features:
  • Under Voltage Protection on V_SUP
  • TXD Dominant Time Out Protection (DTO)
  • Thermal Shutdown Protection
  • Unpowered Node or Ground Disconnection Failsafe at System Level.
• Available in SOIC (8) Package and Leadless VSON (8) Package with Improved Automated Optical Inspection (AOI) Capability

Smart Diode Controller 8-Pin VSSOP T/R

2.2MHz Wide VIN Non-synchronous Boost/SEPIC/Flyback Controller 12-WSON -40 to 150