BQ25970YFFT

The TS3USB3000 device is a double-pole, double throw (DPDT) multiplexer that includes a high-speed Mobile High-Definition Link (MHL) switch and an USB 2.0 High-Speed (480 Mbps) switch in the same package. These configurations allow the system designer to use a common USB or Mico-USB connector for both MHL video signals and USB data.

The TS3USB3000 has a V_CC range of 2.7 V to 4.3 V and supports overvoltage tolerance (OVT) feature, which allows the I/O pins to withstand overvoltage conditions (up to 5.5 V). The power-off protection feature forces all I/O pins to be in high-impedance mode when power is not present, allowing full isolation of the signal lines under such condition without excessive leakage current. The select pins of TS3USB3000 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from a mobile processor.

The TS3USB3000 comes with a small 10-pin UQFN package with only 2.0 mm × 1.5 mm is size, which makes it a perfect candidate to be used in mobile applications.

TPS65132 Dual Output LCD Bias for Smartphones and Tablets

TS3USB221 High-Speed USB 2.0 (480 Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable

USB Type-C Port Control with Power Delivery USB 2.0/USB 3.1 9-Pin DSBGA T/R

4.5-V, 2:1 (SPDT), 10-channel MIPI switch 36-DSBGA -40 to 85

4-data lane, 2:1 MIPI switch (10-channel, 2:1 analog switch) 36-DSBGA -40 to 85

2.0-A 3.5-MHZ VOUT 5.0V BOOST CONVERTER

6.1W Digital Input Smart Amp with I/V Sense for Speaker Protection and Integrated 11V Class-H Boost 36-DSBGA -40 to 85

LED DRVR Boost 3-CH PWM 41.1V 0.03A 12-Pin DS-BGA T/R