TPS22970YZPR

Charge Pump STPUP 5V 140mA 6-Pin WSON EP T/R

Complete Power Supply 20-Pin WQFN EP T/R

PHY 1-CH 1000Mbps 48-Pin VQFN T/R

TPS60150 140mA, 5V Charge Pump in 2x2 SON

CSD83325L 12V, N Channel NexFET MOSFET, dual LGA, 5.9mOhm

TPS51716 Complete DDR2, DDR3, and DDR3L Memory Power Solution Synchronous Buck Controller, 2-A LDO

The TS3USB3000 device is a double-pole, double throw (DPDT) multiplexer that includes a high-speed Mobile High-Definition Link (MHL) switch and an USB 2.0 High-Speed (480 Mbps) switch in the same package. These configurations allow the system designer to use a common USB or Mico-USB connector for both MHL video signals and USB data.

The TS3USB3000 has a V_CC range of 2.7 V to 4.3 V and supports overvoltage tolerance (OVT) feature, which allows the I/O pins to withstand overvoltage conditions (up to 5.5 V). The power-off protection feature forces all I/O pins to be in high-impedance mode when power is not present, allowing full isolation of the signal lines under such condition without excessive leakage current. The select pins of TS3USB3000 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from a mobile processor.

The TS3USB3000 comes with a small 10-pin UQFN package with only 2.0 mm × 1.5 mm is size, which makes it a perfect candidate to be used in mobile applications.

Analog Switch Single DPDT 10-Pin UQFN T/R

TPS81256 Integrated Power Solution, 3W High-Efficiency boost converter module in MicroSiP package

ESD Suppressors TVS ±17kV@Air Gap/±17kV@Contact Discharge 3-Pin X2SON T/R