Power Management
PTH05020WAS
Texas Instruments
PTH05020WAS Inventory
by: Texas Instruments
Parameters
Features
Products to complete your design
PTH03000W 6 A, 3.3-V Input Wide-Output Adjust Plug-in Power Module
The PTH05010 series non-isolated DC-DC converter complies with the Point-of-Load Alliance (POLA) standard. It offers some of the most advanced POL functions in the industry, including Auto-Track™ sequencing for controlled power-up/power-down of complex semiconductor devices such as DSPs, FPGAs and ASICs, and voltage margining. Standard features include pre-bias startup, input undervoltage lockout, remote sense, remote On/Off and auto resetting short-circuit protection.
PTH05010 series converters have an input voltage range of 4.5 to 5.5 Vdc and an output voltage that can be trimmed from 0.8 to 3.6 Vdc to meet a wide variety of semiconductor power needs. Rated at 54 watts, the converters offer up to 95% efficiency and can deliver up to 15 amps. Available in through-hole horizontal mount and surface-mount versions, they have a small 0.62 x 1.37 inch (15.7 x 34.8 mm) footprint and an installed height of just 0.35 inch (9 mm).
Auto-Track™ is a trademark of Texas Instruments.
OP Amp Single GP ±30V/60V 11-Pin(11+Tab) TO-220 Tube
LDO Regulator Pos 3.3V 0.2A 5-Pin SOT-23 T/R
SN74LVC1G08 Single 2-Input Positive-AND Gate
