CSD16408Q5

LDO Regulator Pos 0.796V to 3.6V 1.5A 20-Pin VQFN EP T/R

The TPS24710/11/12/13 is an easy-to-use, 2.5 V to 18 V, hot-swap controller that safely drives an external N-channel MOSFET. The programmable current limit and fault time protect the supply and load from excessive current at startup. After startup, currents above the user-selected limit will be allowed to flow until programmed timeout – except in extreme overload events when the load is immediately disconnected from source. The low, 25mV current sense threshold is highly accurate and allows use of smaller, more efficient sense resistors yielding lower power loss and smaller footprint.

Programmable power limiting ensures the external MOSFET operates inside its safe operating area (SOA) at all times. This allows the use of smaller MOSFETS while improving system reliability. Power good and fault outputs are provided for status monitoring and downstream load control.

OPA2188 0.03?V/?C, 6?V Vos, Low Noise, Rail-to-Rail Output, 36V Zero-Drift Operational Amplifier

SN74LVC1T45 Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation and 3-State Outputs

Hot Swap Controller 1-CH 18V 10-Pin VSSOP T/R

IN STOCK SHIP TODAY

SMT T/R

TPS82130 STEP-DOWN CONVERTER MICROSIP

2.95-V to 16-V input, stackable 40-A, SWIFT synchronous buck converter with PMBus 40-LQFN-CLIP -40 to 125