PTH05000WAS

The PTH05010 series non-isolated DC-DC converter complies with the Point-of-Load Alliance (POLA) standard. It offers some of the most advanced POL functions in the industry, including Auto-Track™ sequencing for controlled power-up/power-down of complex semiconductor devices such as DSPs, FPGAs and ASICs, and voltage margining. Standard features include pre-bias startup, input undervoltage lockout, remote sense, remote On/Off and auto resetting short-circuit protection.

PTH05010 series converters have an input voltage range of 4.5 to 5.5 Vdc and an output voltage that can be trimmed from 0.8 to 3.6 Vdc to meet a wide variety of semiconductor power needs. Rated at 54 watts, the converters offer up to 95% efficiency and can deliver up to 15 amps. Available in through-hole horizontal mount and surface-mount versions, they have a small 0.62 x 1.37 inch (15.7 x 34.8 mm) footprint and an installed height of just 0.35 inch (9 mm).

Auto-Track™ is a trademark of Texas Instruments.

12F1 power products

TLV1117 Single Output LDO, 800mA, Fixed and Adj., Internal Current limit, Thermal Overload Protection

IN STOCK SHIP TODAY

LDO Regulator Pos 3.3V 0.8A 4-Pin(3+Tab) SOT-223 T/R

MSP430F1612 16-bit Ultra-Low-Power MCU, 55kB Flash, 5120B RAM, 12-Bit ADC, Dual DAC, 2 USART, I2C, HW Mult, DMA

SN74AVC16244 16-Bit Buffer/Driver With 3-State Outputs

LM1085 3A Low Dropout Positive Regulators

LM2675 SIMPLE SWITCHER Power Converter High Efficiency 1A Step-Down Voltage Regulator

SN74CBT3257 4-Bit 1-Of-2 FET Multiplexer/Demultiplexer