MYS-6ULX-IOT

Measuring only 70mm by 55mm, the MYS-6ULX-IOT is a high-performance low-cost SBC designed for IoT applications. It is based on NXP i.MX 6ULL processor family which features the most efficient ARM Cortex-A7 core and can operate at speeds up to 528 MHz. The i.MX 6ULL is supported by discrete component power circuitry. It is a cost down version of i.MX 6UltraLite with fewer security features and lower maximum CPU frequency, but adding ePD support.

The MYS-6ULX-IOT Single Board Computer has two 2.0mm pitch 2x20-pin headers on board to allow extension of the controller signals and ports to the base board through headers and connectors, thus exposing more features of the i.MX 6ULL ARM Cortex-A7 Processor, so it can also be used as an SoM for your next embedded design. It is ready to run Linux 4.1.15 with Debian distribution or Yocto project with ported QT. MYIR has also provided an interesting demo to enable customers to experience Amazon Alexa Voice Service.

MYIR is using the 14 x 14mm, 0.8 mm ball pitch, 289 MAPBGA package i.MX6ULL application processor on the MYS-6ULX-IOT board which provides multiple compatible options of Y0, Y1 and Y2 sub families. The MCIMX6Y2DVM05AA is the default part delivered with the board and MYIR offers optional configurations for mass customization.

The MYS-6ULX-IOT is one of the two variants of the MYS-6ULX Single Board Computer. Compared with the other variant MYS-6ULX-IND, the MYS-6ULX-IOT is oriented for IOT applications and using i.MX 6ULL series processors while the MYS-6ULX-IND is targeting Industry 4.0 applications and based on i.MX 6UL series processors. They share the same hardware circuit design and fully compatible in software but also have their own characteristics. Below table list the features of the two MYS-6ULX boards to help customers make choices according to your requirements.

In addition, MYIR will offer optional LCD modules, camera modules, GPS module, GPRS module and expansion base board to add functionality to the boards, which would be a complete embedded system.

Features:

• Highly-integrated Single Board Computer for IoT Applications
• 528MHz NXP i.MX 6ULL ARM Cortex-A7 Processor
• 256MB DDR3, 256MB Nand Flash
• Ethernet, WiFi, LCD, USB Host, OTG, TF Card, Buttons, LED, IO...
• Optional 4.3 or 7 inch LCD/TSP
• Support Linux 4.1.15 with Debian distribution or by Yocto Project with Ported QT