Home > Products > SynQor Expands Eighth Brick PowerQor Family with 2.5V/35A Low Profile Device

Power

SynQor Expands Eighth Brick PowerQor Family with 2.5V/35A Low Profile Device

29th May 2008

SynQor

ES Admin

0 0

SynQor has added to its PowerQor range of isolated dc/dc converters with the PQ60025ETL35. This low profile Eighth Brick sized device, measuring just 22.9mm x 58.4mm x 8.1mm offers a regulated output of 2.5V up to a maximum rating of 35A with little or no derating necessary. The input voltage range exceeds the requirements of a 48V telecom system, with the unit operating from 35-75V. The addition of this device enables designers to reduce the board area required for their power solutions by 38% by replacing a previously required Quarter Brick device with the smaller Eighth Brick format.

Employing SynQor’s patented synchronous rectified topology, the PQ60025ETL35 delivers the maximum 35A rating at up to 88% efficiency. Half load efficiency is even higher, peaking at 90%. This exceptional performance maximises the usable output power of the open frame unit under typical operating conditions, enabling the full 35A rated output current to be delivered at up to 55degC ambient with just 0.5m/s of airflow. Full operating temperature range is -40 to +100degC.

The PQ60025ETL35 is capable of withstanding transients on the input to 100V for 100ms, and has a basic isolation level from input to output of 2250Vdc. Control and protection features include remote sense, a wide output voltage trim range of –20% to +10%, input under-voltage lockout, output OVP, current limit, short circuit protection, and thermal shutdown. The PQ60025ETL35 is fully RoHS 6/6 compliant.