Power Integrations’ LinkSwitch-PH and LinkSwitch-PL LED Driver ICs Deliver Flicker-Free TRIAC Dimming in Solid-State Lighting Applications

The LinkSwitch-PH and LinkSwitch-PL product families feature integrated single-stage power factor correction (PFC), enabling SSL luminaires to achieve PF > 0.9. LinkSwitch-PH devices incorporate primary-side-control technology, which eliminates the optocoupler and supporting components used in traditional isolated flyback designs. Non-isolated LinkSwitch-PL designs further reduce component count, resulting in improved reliability and a reduced bill of materials (BOM). Both IC families are monolithic – incorporating the controller and MOSFET onto a single silicon die – which simplifies PCB layout by minimizing component count and eliminating parasitics between the controller and power MOSFET. These new LinkSwitch products are optimized for high efficiency in simple flyback designs and operate at input voltages up to 305 VAC, enabling the development of both single-voltage and universal-input products suitable for residential and commercial lighting applications worldwide.

When operated within manufacturers’ temperature and drive-current guidelines, LEDs can be expected to operate for more than 50,000 hours. The weakest link in an LED lighting system is the driver circuitry, which is burdened with unreliable optocouplers and electrolytic capacitors. Power Integrations’ accurate primary-side-control technology, featured in LinkSwitch products, eliminates the optocoupler, and the new LinkSwitch LED driver IC product families do not require the use of electrolytic bulk capacitors. Designers using the LinkSwitch-PL and LinkSwitch-PH for SSL products can expect the operational life of the driver to match that of its accurately controlled LED array.

Bill Weiss, lighting business development manager at Power Integrations, comments: “Both new product families are ideal for space-constrained LED drivers used in replacement lamps. The LinkSwitch-PH family, optimized for isolated designs and rated up to 50 watts output power, is also exceptionally effective for external LED ballasts, often used in downlighting, architectural lighting, signage, and outdoor lighting. Both devices reduce system BOM count and size, thereby increasing system reliability. These ICs enable designers to optimize system efficiency and meet or exceed all regulatory standards, such as ENERGY STAR and EN61000-3-2.”