Power

PMIC developed for AMOLED displays

7th April 2022
Mick Elliott
0

A fully integrated Power-Management IC (PMIC) for AMOLED displays from STMicroelectronics combines a low quiescent current and enhanced flexibility to extend the battery runtime of portable devices.

With an input-voltage range from 2.9V to 4.8V, the STMP30 PMIC contains three integrated DC-DC converters to provide all the power rails needed for AMOLED displays in smartphones and other portable devices.

The 550mA VOUT1 boost converter has an adjustable output voltage, unlike other devices that fix VOUT1 at 4.6V.

The voltage can be set between 4.6V and 5.0V, in 100mV increments, to optimise the display brightness for lowest power consumption and best visibility under any conditions.

The 5.0V maximum setting allows use of High-Brightness Mode (HBM) for best viewing in bright outdoor lighting.

The remaining two outputs are provided by a 550mA single-phase buck-boost inverting converter, programmable from -0.8V to -6.6V, and a 5.5V to 7.9V 150mA boost converter.

Output voltages are programmed using Single-Wire (S-Wire) protocol through external pins.

The PMIC also receives S-Wire messages to operate the AMOLED in Always-On Display (AOD) mode, which improves user convenience by showing information on-screen continuously at very low power.

A true shutdown mode helps maximise power savings, as well as safety features that include thermal protection, input under-voltage lockout, and soft-start with inrush current limiting.

In addition, the high-voltage outputs feature fast-discharge circuitry, and offer short-circuit protection.

The PMIC is in volume production now.

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier