15W I2C Power Manager Charges Li-Ion Cells at 3.5A for Tablets, UMPCs & Portable Power Systems

Because power is conserved, the LTC4155 allows the output load current to exceed the current drawn by the input supply, maximizing use of the available power for battery charging without exceeding the input supply power delivery specifications. For example, when powered from a 5V/2A wall adapter, the IC’s switching regulator efficiently transfers over 90% of the available 10W, enabling up to 2.4A charge current and resulting in faster charge times. Unlike ordinary switching battery chargers, the LTC4155 features instant-on operation to ensure that system power is available at plug-in even with a deeply discharged battery. USB On-The-Go support provides a 5V supply back to the USB port without any additional components.
A simple 2-wire I2C port provides broad adjustability for many system control parameters including charge current, input current (including USB 2.0 and 3.0 compatible settings) and float voltage. The communications bus also allows the LTC4155 to provide status information such as battery temperature, input supply status, charger status and fault status.
The LTC4155’s autonomous full-featured single-cell Li-Ion/Polymer battery charger is capable of up to 3.5A charge current and features four float voltage settings and fifteen charge current settings. For improved safety margin, an integrated overtemperature battery conditioning circuit can optionally reduce the battery voltage in case both high battery temperature and high battery voltage occur simultaneously. Further, the charger includes automatic recharge, bad cell detection, trickle charge, programmable safety timer, thermistor temperature qualified charging, programmable end-of-charge indication/termination and programmable interrupt generation.
The LTC4155’s dual input, priority multiplexing overvoltage protection (OVP) circuit prevents any damage from accidental application of high voltage. Its ideal diode controller guarantees that ample power is always available to VOUT even if input power is insufficient or absent. To minimize battery drain when a device is connected to a suspended USB port, an LDO from VBUS to VOUT provides the allowable USB to suspend current to the application. To eliminate battery drain between manufacture and sale, a ship-and-store feature reduces the already low battery standby current to nearly zero.
The LTC4155 is housed in a low profile (0.75mm) 28-pin 4mm x 5mm QFN package and is guaranteed for operation from -40°C to 85°C. 1,000-piece pricing starts at $4.07 each. For more information, visit www.linear.com/product/LTC4155.