LED controller supports buck, boost and buck-boost
The MPQ2484U is a flexible, multi-topology, asynchronous controller from MPS for LED lights requiring high luminous output.
It is available at distributor Digi-Key.
The device supports buck, boost, and buck-boost configurations, which makes it suitable for a wide range of LED lighting applications.
The MPQ2484U features a wide 4.5 V to 45 V input voltage (VIN) range and a maximum boost output voltage of up to 75 V. Peak current mode provides a fast transient response and simplifies loop stabilization.
Switching frequency (fSW) can be set via the FSET pin, or it can be synchronized with a 100 kHz to 2.2 MHz external clock signal. The configurable frequency spread spectrum (FSS) function can periodically enable frequency dithering to improve EMI. The MPQ2484U provides switch-mode dimming by utilising an external P-channel MOSFET.
Without a P-channel MOSFET, two-step dimming or pulse-width modulation (PWM) dimming can be selected.
Robust fault protections include thermal shutdown, cycle-by-cycle peak current limiting, output overvoltage protection (OVP), output short-circuit protection (SCP), LED open protection, and LED short protection. A fault indicator outputs an active logic low signal if a fault occurs.
Features include integrated P-channel MOSFET driver for switch dimming, and one or multiple LED short protection.
The device is available in a TSSOP-28EP package
Applications are automotive exterior LED lighting including headlights, rear lights and fog lights and commercial and industrial LED lighting.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
