Power
Keeping electric vehicle batteries cool
Heat can damage the batteries of electric vehicles - even just driving fast on the freeway in summer temperatures can overheat the battery. An innovative new coolant conducts heat away from the battery three times more effectively than water, keeping the battery temperature within an acceptable range even in extreme driving situations.
BattThus far, conventional cooling systems have not reached their full potential. Either the batteries are not cooled at all - which is the case with ones that are simply exchanged for a fully charged battery at the service station - or they are air cooled. But air can absorb only very little heat and is also a poor conductor of it. What's more, air cooling requires big spaces between the battery's cells to allow sufficient fresh air to circulate between them. Water-cooling systems are still in their infancy. Though their thermal capacity exceeds that of air-cooling systems and they are better at conducting away heat, their downside is the limited supply of water in the system compared with the essentially limitless amount of air that can flow through a battery.
More space under the hood
In future, another option will be available for keeping batteries cool - a coolant by the name of CryoSolplus. It is a dispersion that mixes water and paraffin along with stabilizing tensides and a dash of the anti-freeze agent glycol. The advantage is that CryoSolplus can absorb three times as much heat as water, and functions well as a buffer in extreme situations such as trips on the freeway at the height of summer. This means that the holding tank for the coolant can be much smaller than those of water-cooling systems - saving both weight and space under the hood.
In addition, CryoSolplus is good at conducting away heat, moving it very quickly from the battery cells into the coolant. With additional costs of just 50 to 100 Euros, the new cooling system is only marginally more expensive than water cooling. The coolant was developed by researchers at the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT in Oberhausen.
As CryoSolplus absorbs heat, the solid paraffin droplets within it melt, storing the heat in the process. When the solution cools, the droplets revert to their solid form. Scientists call such substances phase change materials or PCMs. The main problem we had to overcome during development was to make the dispersion stable, explains Dipl.-Ing. Tobias Kappels, a scientist at UMSICHT.
The individual solid droplets of paraffin had to be prevented from agglomerating or - as they are lighter than water - collecting on the surface of the dispersion. They need to be evenly distributed throughout the water. Tensides serve to stabilize the dispersion, depositing themselves on the paraffin droplets and forming a type of protective coating. To find out which tensides are best suited to this purpose, we examined the dispersion in three different stress situations: How long can it be stored without deteriorating? How well does it withstand mechanical stresses such as being pumped through pipes? And how stable is it when exposed to thermal stresses, for instance when the paraffin particles freeze and then thaw again? says Kappels.
Other properties of the dispersion that the researchers are optimizing include its heat capacity, its ability to transfer heat and its flow capability. The scientists' next task will be to carry out field tests, trying out the coolant in an experimental vehicle.
For more read Car Traction Batteries - The New Gold Rush 2012-2022 .