Dual gate driver operates at -40°C to +125°C

It is available at distributor Anglia Components.

This is a flexible and compact gate driver with 4 A output current capability and rail-to-rail outputs, the device allows implementation of either unipolar or bipolar gate driving making it suitable for mid and high-power applications such as power conversion and industrial motor driver inverters.

The device features separated output pins that allow users to independently optimise turn-on and turn-off by using dedicated gate resistors, while an integrated Miller CLAMP function helps avoid gate spikes during fast commutations in half-bridge topologies.

It allows implementing negative gate driving, and the on-board isolated DC-DC converters allow working with optimised driving voltages for MOSFET and IGBT.

Integrated protection functions include dedicated SD and BRAKE pins, UVLO and thermal shutdown are included to easily design high reliability systems.

In half-bridge topologies the interlocking function prevents outputs from being high at the same time, avoiding shoot-through conditions in case of wrong logic input commands.

The interlocking function can be disabled by a dedicated configuration pin, thus allowing independent and parallel operation of the two channels.

Input to output propagation delay results are contained within 75 ns, providing high PWM control accuracy and a standby mode is available in order to reduce idle power consumption. The galvanically isolated HV side of the device also has a watchdog function which can identify when it is not able to communicate with LV side, for example because the VDD of the LV side is not supplied. In this case the output of the driver is forced in “safe state” until communication link is properly established again.

The device is available in the wide body SO-36W package and has a specified operating temperature range of -40°C to +125°C.

Support for developers is provided by the EVALSTGAP2HDM demonstration board which allows evaluation of all the STGAP2HDM features while driving a half-bridge power stage with voltage rating up to 1200 V in TO-220 or TO-247 package.

The board allows easy selection and modification of values of relevant external components to simplify driver performance evaluation under different application conditions and fine pre-tuning of final application components.

The galvanically isolated dual gate driver is suitable for a wide range of applications including: Motor driver for industrial drives, factory automation, home appliances and fans, 600/1200 V inverters, Battery chargers, Induction heating, Welding, UPS, Power supply units, DC-DC converters and Power Factor Correction.