Power

Delta T31SN DC/DC family in compact 1/32 brick format

13th August 2020
Alex Lynn
0

It has been announced that the T31SN series of 1/32 Brick, 9 to 53V input, single output, non-isolated DC/DC converters, are the latest offering from Delta Electronics.

This product family provides up to 100W of power or eight amps of output current. With creative design technology and optimisation of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. Peak efficiency of the module is up to 98.0%.

The modules operate on an input voltage of nine to 53V with trimmable outputs of between 3.3 to 16.5V and five to 30V

It also meets the latest safety standards of IEC/EN/UL/CSA 62368-1, 2nd edition.

Options available include:

  • Negative or Positive Remote On/Off
  • Power Good Signals
  • Through hole pins or SMD pins
  • Open frame or Potted version in a standard or flanged case

The datasheets include application notes on implementation of the Power Good signals, output voltage adjustment trimming along with many suggestions regarding production set up.

Features

  • High efficiency: 98.0%
  • Industry standard 1/32nd brick form factor
  • Fixed frequency operation
  • Thermal limit, Input UVLO
  • Output OCP Hiccup mode
  • Output voltage trim range: 3.3V to 16.5V, & 5V~30V
  • Output Remote sense
  • Monotonic start up into normal
  • No minimum load requirement
  • Working altitude to 5000m

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier