Pending
RS485/RS422 Transceivers Operate up to 20MBps or 250kbps for Low EMI
Linear Technology has introduced the LTC2856/LTC2857/LTC2858 low power RS485/422 transceivers, operating on 5V supplies. The LTC2856-1, LTC2857-1 and LTC2858-1 operate at maximum data rates of 20MBps, while the LTC2856-2, LTC2857-2 and LTC2858-2 feature 250kbps slew rate limited driver outputs to control high frequency emission from equipment and data cables. Enhanced ESD protection on the transceiver interface pins allows the ICs to withstand ±15kV for ESD strikes (Human Body Model) without latchup or damage. The receiver fail-safe feature further enhances the devices' operation by guaranteeing a high output state under conditions of floating or shorted inputs.
The receivers of the LTC2856/LTC2857/LTC2858 hves a one-eighth unit load, supporting up to 256 devices on the bus, while the drivers of all ICs maintain a high output impedance over the entire common mode range when disabled or when the supply is removed. Excessive power dissipation caused by bus contention or a fault is prevented by current limiting all outputs and by thermal shutdown. The combination of features makes the LTC2856/LTC2857/LTC2858 an ideal fit across various applications in the consumer, industrial, medical and automotive markets. The ICs are offered in 8-pin and 10-pin MSOP and 3mm x 3mm DFN packages. Specified over the commercial and industrial temperature ranges and available from stock, pricing for the LTC2856/LTC2857/LTC2858 begins at $1.45 each in 1000-piece quantities.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
