Spray Valve from Intertronics for low viscosity materials

The new Fisnar SV1000SS is a stainless steel unit for fluids of up to 1000 cps with a shot rate frequency of 200 c.p.m. and readily mounted on fixed stands from the Intertronics range or on low cost robotic systems such as the 4000 and 7400 which further enhance the production flexibility of the units operation. So pleased are Intertronics with the operation of this device that they are delighted to arrange a demonstration – contact info@intertronics.co.uk.

Features of the SV1000SS include capability for cone (circular) or fan pattern spray of materials such as flux, polyurethane, paint, lubricants, inks and conformal coatings – for example silicone conformal coatings from ACC or many of the DYMAX 948 range of solvent free, fast light-cure materials which ensure electrical insulation/physical protection in harsh environments.

The SV1000SS is precision manufactured in stainless steel to provide a close tolerance 12° spray angle without clogging. Control may be provided by an SCC100 valve controller which regulates the operating air pressure opening a needle valve thus allowing material to flow; a separate air line creates pressure in the air cap, atomizing the fluid. The valve is adjustable by turning the stroke-adjust control at the rear of the valve which will fine tune the spray pattern, with opening and closing effected by applying pressure to the ports subject to the valve controller, using fluid pressure of as little as 70 psi or up to 100 psi with a spray flow rate up to 28cc/sec.