Greener, cheaper and more controllable uva spot-curing

Curing energy is generated using high-intensity LEDs (Light Emitting Diodes) and produces nearly double the intensity of any other LED spot-curing lamp on the market today. This system delivers maximum curing energy through a 5 mm diameter lightguide, with an output up to 15 W/cm2. While providing more power, the design also eliminates the safety concerns from the high heat generated by units with the LED array at the end of the wand. In addition, the relatively narrow frequency band produced by LEDs generates cooler curing temperatures at the substrate level. The unit is CE certified, RoHS compliant, offers user-friendly operation, and boasts a useful LED life of over 50,000 hours. The BlueWave LED Prime UVA also includes an intensity adjustment feature which allows users to adjust and control intensity output from 0% to 100% to assist with process validation and control. Intensity level measurement is easily accomplished with a radiometer. An ACCU-CAL™ 50-LED radiometer may be used to take readings through the lightguide in process development and actual production settings, providing the most accurate and consistent method of light-intensity measurement, whether using single or multi-legged lightguides. Further information regarding Intertronics’ products can be found at www.intertronics.co.uk.