Home > Pending > Analog Devices Announced First Data Converter with Dynamic Power Control

Pending

Analog Devices Announced First Data Converter with Dynamic Power Control

7th July 2010

Analog Devices

ES Admin

0 0

Datasheet

Advances in factory automation, process controls, and industrial instrumentation are contributing to higher manufacturing productivity and increased output. The sustainability of such advances is under threat, however, as the density of factory process control systems reaches levels where rising power consumption and thermal issues are beginning to undermine equipment performance, reliability, and safety. Analog Devices today introduced a multichannel DAC (digital-to-analogue converter) with innovative dynamic power control circuitry including ADI’s leading dc-to-dc switching converters and diagnostic features. This new DAC can enable increased system productivity, while simultaneously lowering power use without affecting safety and reliability. Watch the AD5755 DAC video for more information on its features.

ADI’s highly integrated AD5755 data converter is a complete, multichannel control IC (integrated circuit) that incorporates four precision 16-bit DACs with programmable voltage or 4–20-mA output drivers, along with dynamic power control. The dynamic power control feature works by continually sensing the load impedance and delivering the required power to the load while minimizing power loss in the rest of the system. This reduces self-heating and temperature elevation. The unparalleled combination of features and performance supports four times more channels than any other integrated converter, enabling up to four times more terminals at twice the performance in a single analogue I/O module. The new converter also lowers power consumption by 80 percent and net thermal rise (silicon temperature minus ambient temperature) by 75 percent compared to other control driver technologies.

“Increased terminal density puts pressure on module size and can result in extra heat generation in industrial systems,” said Mike Britchfield, vice president for the Industrial and Instrumentation Group, Analog Devices. “By reducing power consumption and self-heating, the dynamic power control function of the AD5755 meets customer requirements for increased channel density. This allows manufacturers to achieve channel-rich designs without having to increase the form factor of their systems or back–off on other performance parameters.”

More on the AD5755 Data Converter

The 16-bit AD5755 offers a full channel spec with a maximum total unadjusted error of 0.05 %, a relative accuracy of ±0.003% max, and does not require system calibration, which shortens development time and reduces system maintenance costs. In addition, the single chip architecture combines multiple converters, power management, linear and other functions, increasing MTTF (mean time to failure) and improving reliability. Also included are various diagnostics for real-time fault analysis, including communication, connection, and interface alerts, which simplify the design task and boost operational up-time.

The device, which supports standard industrial voltage and current output ranges, can be used with standard HART (Highway Addressable Remote Transducer) protocol modems. Also integrated on-chip is a 5-ppm/°C internal reference, user-accessible offset and gain registers and a 30-MHz SPI (serial peripheral interface) compatible interface. The device is specified over the extended industrial temperature range of –40°C to +105°C and is housed in a 9 mm × 9 mm LFCSP (lead-frame chip scale package).