Film capacitors supply high power density and low ESR

The capacitors have been designed and tested to exceed the industry’s most stringent requirements for high humidity, vibration testing and thermal cycling.

Green energy and electric transportation systems have pushed explosive growth in inverter markets. Many of these applications present harsh operating environments for power electronics circuitry.

Often, these applications demand a high percentage of uptime, increasing the need for highly reliable components.

The Temperature, Humidity at Bias (THB) test exposes parts to the harsh conditions of 85°C at 85% relative humidity with rated voltage applied.

This demanding test simulates the harsh operating conditions encountered in many commercial and industrial inverter applications. Such conditions can cause non-THB rated capacitors to fail early from moisture penetration.

While most capacitor makers validate their THB components for 1,000 hours under these conditions, CDE’s BLH DC Link Capacitor series has been validated for 1,500 hours.

Utilising advanced materials and processes, these board mounted capacitors have been designed and tested to meet the rigours of automotive AEC-Q200 testing.

Their solvent-resistant plastic case and epoxy encapsulation system are UL Recognized and meet IEC61071.

Tin-plated copper RoHS-compliant terminations ensure excellent solderability.

With superior resistance to moisture and robust design, these capacitors are well suited for solar, wind, UPS, EV chargers, and other inverter applications that may be subjected to wide-ranging environmental conditions.

The series is optimised for DC link applications in medium to high-power inverters.

Capacitance ranges from 1.0 to 170 µF at 450-1,200 Vdc, with high rms ripple current ratings up to 36 Arms.

When operated at a 70 °C hot-spot temperature with rated voltage applied, their life expectancy is 100,000 hours.

Available with 2- or 4-pin, the film capacitors have a 10% tolerance standard with 5% optional.

The case material is a UL94V-0 plastic and the terminal material is tin plated copper for best solderability.

They range in size from 32mm L x 18mm H x 9mm W to as much as 57.5mm L x 80mm H x 35mm W.