Optoelectronics
60V Step-Down LED Driver Drives Three Independent LED Strings of 100mA LEDs & Offers 10,000:1 True Color PWM Dimming
Linear Technology announces the LT3597, a 60V, 1MHz, step-down DC/DC converter designed to operate as a three channel, constant current LED driver. Each channel of the LT3597 contains a constant current sink LED driver with a dedicated adaptive-output buck converter.
ThisThe LT3597 uses three independent 400mA, 60V internal switches to provide step-down constant current sources. The internal buck converters use an adaptive feedback loop to regulate the output voltage slightly higher than the required LED voltage to ensure maximum efficiency. If any of the LED strings experience an open or short-circuit, the LT3597 will continue to regulate the other strings and signal the FAULT pin. Additional features include LED current derating based on junction temperature and/or LED temperature and LED disconnect in shutdown.
Summary of Features: LT3597
* Three 100mA Buck Regulators, Each Drives Up to 10 LEDs with Fast NPN Current Sources
* Fast Current Sources for <1µs Pulse Widths, (10,000:1 True Color PWM™ Dimming at 100Hz)
* LEDs Disconnected in Shutdown
* Adaptive VOUT for Increased Efficiency
* 6V to 60V Input Voltage Range
* ± 2% LED Current Matching
* External Resistor Sets LED Current for Each Channel
* Internal Compensation & Soft-Start
* Programmable Switching Frequency (200kHz to 1MHz)
* Synchronizable to External Clock
* Open LED Detection & Reporting
* Shorted LED Pin Protection & Reporting
* Programmable LED Thermal Derating
* Programmable Temperature Protection
* 5mm x 8mm Thermally Enhanced QFN Package with 0.6mm High Voltage Pin Spacing