Optoelectronics

Maximum Detection Efficiency for Photon Counters

6th January 2012
ES Admin
0
In applications in which single photons must be detected, such as in spectroscopy, confocal or Stimulated Emission Depletion (STED) microscopy, single molecule detection, and quantum cryptography, it is not only important to achieve an extremely low dark count rate of the detector, but a detection efficiency that is as high as possible. Each percent counts. Depending on the version, the COUNT modules exhibit efficiencies of >80% at 670nm and >50% at 405nm.
These very good detection rates should not be compromised by additional optical elements such as those required in fiber coupling. In modules with FC connectors a special GRIN lens is integrated that images single photons from the fiber onto the detector chip.

The lenses have been optimised with a double-sided AR coating using our in-house IBS coater. This broadband coating from 400-1100nm has a reflection of less than 1.5%, and has thus led to a reduction in losses in detection efficiency.

Because the coating process is performed in house, we are able to provide further optimisation for special spectral ranges. Reflections of <1% with AR coatings in the range from 400nm to 900nm or from 600nm to 1100nm can be implemented according to customer specifications.

For COUNTblue modules with increased sensitivity in the blue to yellow spectral range, we designed a special AR coating option that has a reflection of under 1% from 350nm to 700nm. Starting the end of 2011, this coating will be routinely available.

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier