|
|
|
|
|
|
|
|
|
| Relec Electronics has introduced the CQB75-300 series of DC-DC converters. They have an input range of 180 to 425Vdc (300V nominal) and outputs covering 5V, 12V, 15V, 24V and 48V. The modules have a 3000VAC reinforced insulation and comply with EN62368 for use in distributed power architectures, telecommunications, data centres, base stations, battery-operated equipment, electric vehicles and industrial applications. |
|
|
|
|
|
|
|
| BQ79612-Q1, BQ79614-Q1 and BQ79616-Q1 provide high-accuracy cell voltage measurements in less than 200 µs for 12S, 14S and 16S battery modules in high-voltage battery management systems in HEV/EV. The family of monitors offers different channel options in the same package type, providing pin-to-pin compatibility and supporting high reuse of the established software and hardware across any platform. The integrated front-end filters enable the system to implement with simple, low voltage rating, differential RC filters on the cell input channels. The integrated, post-ADC, low-pass filters enable filtered, DC-like, voltage measurements for better state of charge (SOC) calculation. |
|
|
|
|
|
|
|
| Micron Technology has announced updates to the company’s portfolio strategy to further strengthen its focus on memory and storage innovations for the data centre. Micron will increase investment in new memory products that leverage the Compute Express Link (CXL), the recently introduced industry standard interface that enables flexible connection between compute, memory and storage. |
|
|
|
|
|
|
|
| Richardson Electronics has announced the availability of Junkosha’s MWX004 interconnect cables. Cables in the MWX004 series come with 1.0mm or 0.8mm connectors and include Junkosha’s patented ‘safety lock’ feature, which prevents bending and breakage of the center pin. |
|
|
|
|
|
|
|
| X-FAB Silicon Foundries has made augmentations that extend the scope of its XS018 180nm sensor process. As a result, the company is now able to offer a photodiode-specific process core module. Whereas previously the XS018 process had been mainly focused on the fabrication of multi-pixel CMOS image sensors, this new module is dedicated to photodiode fabrication. |
|
|
|
|
|
|
|
| Late last year, Prime Minister Boris Johnson announced his green plan to ban new cars and vans, powered wholly by petrol and diesel, in the UK from 2030. That November announcement has highlighted a range of possibilities and challenges for designers, manufacturers and distributors of EV charging solutions such as Solid State Group, to ensure the Prime Minister’s vision is a success. |
|
|
|
|
|
|
|
| One of the major considerations when specifying an adhesive is how quickly it will deliver return on investment (ROI), a metric that is affected by a variety of tangible and intangible factors. Here Matthew Baseley, Technical Sales Executive at adhesives specialist Intertronics, has explained the considerations that determine return on investment (ROI) in an adhesives process. |
|
|
|
|
|
|
|
| Five in every six (83%) manufacturers would expect their electronic products to fail within a year without liquid protection, with accidental submersion and spills seen as the two biggest risks to causing liquid damage to products, according to a research study carried out by liquid protection solutions provider P2i. |
|
|
|
|
|
|
|
| The technology behind Electric Vehicles (EVs) is improving rapidly. Energy density is increasing at the cell- and pack-level with changes to the cathode, anode, pack design and much more. |
|
|
|
|
|
|
|
| Ultimaker organises the Ultimaker Transformation Summit. This free online summit, being held 20th-23rd April, will feature vision keynotes, product launches, and demonstrations. A fully customised, interactive showroom brings the Ultimaker ecosystem to life. |
|
|
|
|
|
|
|
|
|
|
