|
|
|
|
|
The TPS7H4001-SP is a radiation-hardness-assured, 7-V, 18-A synchronous buck converter with integrated low-resistance high-side and low-side MOSFETs in a thermally enhanced 34-pin ceramic flatpack package. High efficiency and reduced component count are achieved through current mode control. |
|
|
|
|
|
|
TRINAMIC Motion Control, now part of Maxim Integrated Products, has introduced two new sets of slot type, embedded motion control modules and development tools that feature a real-time, sensor-free control technology. These complete controller/driver modules keep the motor control system’s communications traffic low by processing real-time critical functions on-board and offloading demand on the system processor. |
|
|
|
|
|
|
The E35SE series of isolated 150W 1/8 brick DC/DC converters are available in an open frame or enclosed potted case offers a nine to 60V input range with single voltage outputs of five, 12, 24 and 48V in an industry standard footprint. |
|
|
|
|
|
|
Siemens Mobility and Infineon Technologies have jointly developed new auxiliary converters to improve the efficiency of on-board power systems using power semiconductors based on silicon carbide (SiC). |
|
|
|
|
|
|
Richardson Electronics has announced it is offering Cornell Dubilier’s new high-energy storage pulse discharge capacitors. Highly customisable, Cornell Dubilier’s pulse capacitors are designed to deliver large amounts of energy in short bursts, providing excellent high-energy storage for applications with high voltage charge/discharge cycles. |
|
|
|
|
|
|
The AC/DC modules of the series PCMAT150 S24 from MTM Power are suitable as a decentralised power supply for both industrial and railway applications. From wide AC/DC (90 to 264 VAC) input range for the worldwide use in industrial networks, a 12 VDC or 24 VDC output voltage is generated. |
|
|
|
|
|
|
Power Integrations has announced a new member of its LinkSwitch-TN2 AC/DC converter family. The new LNK3207 ICs facilitate higher-power offline buck converter designs for appliances and industrial applications by increasing the available output current from 360 to 575mA, while also reducing BOM count. |
|
|
|
|
|
|
Flex Power Modules announces the PNA series, an analogue non-isolated PoL regulator (point of load) that offers excellent efficiency and thermal performance in a small form factor. Its compact size and wide input voltage range of nine to 36V mean that it is suited for a range of industrial applications, including robotics, factory automation and process control, and that it is suitable for both 12 and 24V power systems. |
|
|
|
|
|
|
The MAX17577 and MAX17578 from Maxim Integrated Products are a small, high-efficiency synchronous inverting DC/DC step-down converters. As Maxim’s first 60V inverting DC/DC converters with integrated level shifters, these devices save up to 72% of board space by reducing component count by half while using 35% less energy than the closest competitive solutions. |
|
|
|
|
|
|
The new Li-Ion battery pack BP-LIO-1525 from Bicker Elektronik reportedly offers five times more charge/discharge cycles than conventional lead-acid batteries and thus brings a particularly long service life. The high-quality battery pack impresses both in industrial use and in medical technology applications with its approvals according to IEC/EN 62133-2:2017 and UL 62133:2017 Ed.2. |
|
|
|
|
|
|
|