THine releases camera cable kit for Raspberry Pi V3 camera and Pi 5

This new Kit will also support the RPi Global Shutter (GS) camera with upgraded firmware that will be released soon. The THSER102 is available at Amazon, Digi-Key, and multiple Raspberry Pi Authorised Resellers.

The THSER102 frees Raspberry Pi Camera Module users from being restricted to the short 15–20cm FFC (Flexible Flat Cable) typically used to connect the RPi Camera to the Pi Computer. The Kit enables Raspberry Pi Camera Modules to work >10 meters away from the Computer Board using a standard LAN cable assuring the exact same performance as if the Camera Module was directly connected to the Computer through FFC.

The THSER102 supports Raspberry Pi’s latest Camera Module 3 (12MP Autofocus Camera) as well as their latest Computer Pi 5 (High Performance RPi with 2 Camera Inputs). It also supports older RPi Cameras and Pi Computer Boards including Pi0, Pi0W2, Pi 3B, Pi 3B+, and Pi 4B.

Additionally, the THSER102 supports advanced applications by HAT (Hardware Attached on Top) on HAT and 3ch GPIO Extension features. For example, HAT on HAT allows to use other HAT board(s) with the THSER102 at the same time. 3ch GPIO Extension allows to extend GPIO communication such as controlling Camera Module gimbal.

“Thanks to market feedback about our previous model THSER101 from the Raspberry Pi community, we were able to develop new features that will help many different Raspberry Pi Camera Module applications,” said Tak Iizuka, Chief Solution Architect of THine Solutions. “We use and maximise the performance of our own SerDes IC parts to optimise the Kit’s user experience. Now that the Kit supports the latest Raspberry Pi Camera Module 3 and Pi 5 Computer with many advanced features, we are very excited that the THSER102 can help numerous Raspberry Pi Camera Module users to make their projects easier to complete.”

THSER102 key features:

• Supporting Raspberry Pi 5 in addition to previous models including Pi 4 Model B and other Pi boards.
• Supporting Raspberry Pi camera module 3 in addition to previous camera modules including V2 and HQ camera modules.
• >10-meter extension with standard LAN cable.
• Plug & play – all startup hardware enclosed and no software configuration needed.
• Advanced applications supported
• HAT on HAT
• 3ch GPIO extension
• 20% lower power consumption than previous model THSER101.

Availability

The THSER102 is available for purchase at Amazon, Digi-Key, and multiple Raspberry Pi Authorised Resellers.