Anritsu will look to solidify its position as a leader in optical testing technology by highlighting its advanced solutions for high-speed emerging designs at OFC 2025, (March 30-April 3) in San Francisco.
“OFC will bring together leaders in the optical market who will be displaying technologies to address the speed, bandwidth, and reliability needs of today’s networks. Anritsu looks forward to partnering with many of these innovative companies to highlight our test solutions that provide the high-end performance required to verify today’s leading-edge optical component, transceiver, and equipment designs,” said Keith Even, National Sales General Manager, Anritsu Company.
In booth #3118, Anritsu will have demonstrations highlighting test solutions that support multiple applications, including subsea fiber, optical devices, high-speed interconnects, and more.
Anritsu’s Coherent OTDR MW90010B can detect faults in submarine cables up to 20,000 km within a wide wavelength range of 1527.60 nm to 1567.13 nm. Its wide dynamic range enables submarine cable fault detection and troubleshooting of repeaters at intervals of 80 km or more.
The VectorStar ME7848A Opto-electronic Network Analyzer (ONA) with 145 GHz O/E conversion modules is a wideband measurement system. It can characterize silicon photonics and photonic integrated chip transmitters and receivers, modulators, lasers, photodetectors, and TOSA/ROSA/BOSA/COSA, whether in component form, die, or on a wafer.
The Network Master Pro MT1040A supports 10 Mbps to 400 Gbps networks with a virtualized measurement function, FEC analysis, OTDR integration, automated testing, and validation of 400ZR/400ZR+/OpenROADM transceivers. The analyzer ensures optimal signal integrity, latency, and throughput across diverse network environments.
Simple, numeric, and frequency selective average RF power measurements from 9 kHz to 110 GHz and power coverage as low as -90 dBm can be made with ultraportable Power Master MA245xxA.
Anritsu’s Signal Quality Analyzer-R MP1900A and BertWave MP2110A 4-channel sampling oscilloscope support multiple emerging applications. They can verify high-speed interconnects, such as PCIe Gen1 to Gen6; Thunderbolt 3; USB 3.1, 3.2, 4.0; IEEE 100/200/400GbE; CEI-25/28/56/112G; InfiniBand EDR/HDR; fiber channel; optical module; SERDES, and AOC.
The MT1040A and MS9740B Optical Spectrum Analyzer (OSA) can each be used for comprehensive required Optical Signal-to-Noise Ratio (rOSNR) testing.
Anritsu’s MT1040A has also been chosen by market leaders to showcase leading-edge technologies in their respective booths. The portable tester will be part of demonstrations focused on advancing optical networks, as well as other applications. It will be used by the Ethernet Alliance, Optical Internetworking Forum (OIF), Innovative Optical and Wireless Network (IOWN) Networking Hub and IOWN Global Forum , and Huber + Suhner. The OpenROADM/University of Texas at Dallas will also be part of a demonstration featuring the MT1040A in Anritsu’s booth.
