New UltraFast 25 MS/s 12-bit A/D Digitizer cards have 4 GByte memory

Each input channel has its own ADC and amplifier. This ensures true simultaneous recording on all channels and allows the user to program the input voltage range and dcV offset to best match each sensor. Up to 16 cards can be configured as a synchronous system of up to 128 channels, sharing a common internal or external clock. It is possible to set trigger conditions on multiple cards combined with AND/OR, a feature often used in production test processes. Apart from the external trigger that is standard on all UF2 cards, each channel can be programmed with edge, window, slope and pulsewidth triggers. A Re-Arm trigger condition has been introduced on the UF2 series that reduces the possibility of false triggering on noisy signals.

While many digitizer cards have fixed sample rate ranges, the UltraFast cards have always allowed the user to use a fine resolution sampling rate. The resolution depends on the chosen sample rate (an application note is available on request). The user simply programs the sampling rate required and the driver adjusts the onboard PLL and hardware driver to deliver the closest clock possible. The new UF2 series employs a new design that has even finer resolution and also offers the possibility to install a user specific quartz when an exact sampling rate is required by the application – a feature that is unique.

A number of application specific cost-options are available. Multiple Recording uses a memory segmentation technique to allow recording of a high-speed series of, such as RADAR signals. Gated sampling only records when the external Gate TTL signal supplied by external equipment goes high or low (user definable). The ABA mode was known on traditional transient recorders, but until now has not been available on PCI cards. Introduced in the UF2 series, it allows a slow and fast sampling rate to be defined so that memory is conserved prior to the trigger event and the critical signal recorded at the faster required sampling rate. Engineers who need to record high-speed digital signals for synchronization with the analog, can use the Fast Digital Inputs option that adds 4 TTL input lines to each A/D channel, and records them at the same sample rate. The BaseIO option is most often used to control external equipment or to read/write status signals. It adds 8 TTL lines programmable directionally in two 4 bit groups. Finally, the Timestamp option is used to record the time that each trigger occurs, but can also be fed with a GPS time signal to synchronize multiple cards operated at different locations.

The Ultrafast UF2-3130 cards are available immediately and have the following price ranges: the 2 channel version costs 3260 Euro, 4 channels is 4280 Euro and the 8 channel model is priced at 7250 Euro. Volume discounts and OEM customization prices are available on request.