Home > News & Analysis > Automotive battery monitoring transducers from LEM said to offer improved resolution and offset errors

Analysis

Automotive battery monitoring transducers from LEM said to offer improved resolution and offset errors

27th May 2008

LEM

ES Admin

0 0

LEM has introduced the HAB xx-S family of current transducers for automotive battery-monitoring applications. These transducers have been designed to measure DC, AC, or pulsed currents up to ±100A. A new Application Specific Integrated Circuit (ASIC) incorporated into the units offers resolution 2.5 times better than previous models and a two-fold improvement in offset error, coupled with a significant reduction in price.

The transducers use open-loop, Hall-effect technology that simplifies both installation and servicing by removing the need to cut the [primary] cable carrying the measured current. They provide a pulse-width modulated (PWM) output signal proportional to the primary current being measured and operate from a unipolar 5V supply. Temperature measurement capability can be integrated with the addition of a fourth connection pin to the transducer package.

Output resolution of the HAB 60-S transducer is 0.03A with a linearity of 0.2%. Electric offset error is typically 0.075A across the temperature range from –10° to +65° C, and 0.15 A across the full range from –40° to +125° C.

A water-tight housing and sealed connector provide full environmental protection in engine-compartment applications.

Principal applications are expected to be in the measurement of battery-pack currents in electric, hybrid, and conventional vehicles. The transducers are fully certified to automotive standards.