Analysis

Alarm Monitor sends text message to report alarm condition

19th May 2006
ES Admin
0
The Teleterm 'Silent Sentry' from Omniflex is a new low cost, off the shelf, state-of-the-art Alarm Monitor capable of monitoring a wide range of input types and sending SMS Alarm messages upon detection of an alarm condition. The Silent Sentry has 12 direct Binary or Analogue Inputs, plus a Modbus port allowing alarms from a variety of sources to be monitored. Up to 64 different messages can be sent from one unit.
It can be configured to dial out to up to 10 message recipients (10 phone numbers), each in one of three escalating priority groups. This allows messages to be sent to a selected group of recipients, and if not acknowledged within a set time, then sent to the second group of recipients, and if still not acknowledged, then sent to the third group of recipients.

The Silent Sentry is easily configurable by the user, using the free Omniset configuration software. Using Omniset PRO software, it can even be configured remotely over the GSM network. The Silent Sentry can be connected to any existing alarm annunciator system and can also be used to remotely acknowledge alarms using a mobile phone.

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier