Analog Devices introduces dual 14-bit analog-to-digital converter for 3G and WiMAX base stations

Prior to the AD9640, sampling rates beyond 135 MSPS could only be realized by utilizing single-channel ADCs. With the AD9640, base station designers are able to reach higher sampling rates with one dual ADC, enabling a 50 percent reduction in board space requirements. Additionally, the AD9640 simplifies the design of multicarrier wireless infrastructure systems by decreasing the amount of analog filtering in front of the ADC and offering low power consumption.

“Today’s base station manufacturers are faced with designing for a variety of 3G wireless standards, as well as the emerging WiMAX standard, while also focusing on reducing costs,” said Kevin Kattmann, product line director, High Speed Signal Processing Group, Analog Devices. “Addressing this challenge, the AD9640 offers the performance and sample rate required for these standards, but also provides the low power, small size and digital features to lower overall system costs.”

High Performance Combined with Low Power Consumption
The new ADC delivers best-in-class performance, while only consuming 390 mW of power per channel. The AD9640 offers signal-to-noise ratio (SNR) of 72.7 dBFS and spurious free dynamic range (SFDR) of 85 dBc with a 70 MHz intermediate frequency (IF), and is also capable of supporting IFs as high as 450 MHz, enabling WiMAX designers to use a single downconversion receiver design instead of the traditional two downconversion stages. For optimal performance, the AD9640 can be driven with ADI’s AD8352 low distortion differential amplifier.

The AD9640 divides the input clock by an integer between 1 and 8, reducing system complexity and improving clock jitter. In a traditional base station transmitter, the digital-to-analog converters (DACs), such as ADI’s AD9779, will have a higher clock rate, which is divided down to match the ADC. By implementing the clock divider on-chip, the AD9640 eliminates the need for an external divider. In addition, the phase noise of the source improves in proportion to the divide ratio.

Digital Features Lower System Cost
Incorporated on the AD9640 are digital features that reduce system costs by simplifying the automatic gain control (AGC) loop in the receiver. The new converter is the industry’s first to integrate digital features including a block that monitors the incoming composite signal power, and indicates whether the gain of the receiver needs to be increased or decreased. While the signal monitor block can act as a slow mechanism to change the receiver gain, the AD9640 also includes fast detect (FD) modes, allowing designers to detect an input overrange condition in as little as 2 clock cycles, immediately reducing the gain to avoid overdriving the analog front end. In addition to providing clipping information, the FD bits have programmable thresholds that are useful in optimizing the receiver AGC loop.

Availability and Pricing
The AD9640 is sampling now with production quantities available in April 2007. The ADC is available in 12- and 14-bit resolutions with sample rates of 80, 105, 125 and 150 MSPS. CMOS and LVDS output modes are supported. The 14-bit ADC is priced between $37.50 and $87.50 and the 12-bit ADC is priced between $25.05 and $47.97 in 1,000-piece quantities. Both versions are packaged in 9 mm × 9 mm, 64-lead LFCSP (lead-frame chip-scale package) packages. For more information or to download the ADIsimADC™ behavioral design model for this product, visit www.analog.com/pr/AD9640.