TUSB2046IBVF

High Speed Signal Conditioner 12-Pin X2QFN T/R

TS3USB30 High-speed USB 2.0 (480-Mbps) 1:2 multiplexer & demultiplexer switch with single enable

TSU6721 USB Port Multimedia Load Switch Supports USB, UART, AUDIO, ID, MIC

SMT TAPE

Analog Switch Single DPDT 10-Pin UQFN T/R

TPS51200 3A Sink/Source DDR Termination Regulator w/ VTTREF Buffered Reference for DDR2, DDR3, DDR3L and DDR4

The TS3USB3000 device is a double-pole, double throw (DPDT) multiplexer that includes a high-speed Mobile High-Definition Link (MHL) switch and an USB 2.0 High-Speed (480 Mbps) switch in the same package. These configurations allow the system designer to use a common USB or Mico-USB connector for both MHL video signals and USB data.

The TS3USB3000 has a V_CC range of 2.7 V to 4.3 V and supports overvoltage tolerance (OVT) feature, which allows the I/O pins to withstand overvoltage conditions (up to 5.5 V). The power-off protection feature forces all I/O pins to be in high-impedance mode when power is not present, allowing full isolation of the signal lines under such condition without excessive leakage current. The select pins of TS3USB3000 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from a mobile processor.

The TS3USB3000 comes with a small 10-pin UQFN package with only 2.0 mm × 1.5 mm is size, which makes it a perfect candidate to be used in mobile applications.

TCA6424A Low-Voltage 24-Bit I2C and SMBus I/O Expander

TLV320AIC3106 Low-Power Stereo CODEC with 10 Inputs, 7 Outputs, HP Amplifier and Enhanced Digital Effects

DP83848I PHYTER Industrial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver