Amplifiers
THS4062IDGNR
Texas Instruments
THS4062IDGNR Inventory
by: Texas Instruments
Parameters
Features
Products to complete your design
THS4061 180-MHz High Output Drive Voltage-Feedback Amplifier
THS4082 175-MHz Low-Power Voltage-Feedback Amplifier, Dual
MOSFET DRVR 4.5A 2-OUT Hi/Lo Side Full Brdg/Half Brdg Non-Inv 8-Pin HSOP EP
MOSFET DRVR 1.8A 2-OUT Hi/Lo Side Full Brdg/Half Brdg Inv/Non-Inv 8-Pin SOIC N Rail
THS4012 290-MHz Dual Low-Distortion Voltage-Feedback Amplifier, Dual
OPA1602 OPA1602, OPA1604 SoundPlus High-Performance, Bipolar-Input Audio Op Amp
The OPA1611 (single) and OPA1612 (dual) bipolar-input operational amplifiers achieve very low 1.1-nV/√Hz noise density with an ultralow distortion of 0.000015% at 1 kHz. The OPA1611 and OPA1612 offer rail-to-rail output swing to within 600 mV with a 2-kΩ load, which increases headroom and maximizes dynamic range. These devices also have a high output drive capability of ±30 mA.
These devices operate over a very wide supply range of ±2.25 V to ±18 V, on only 3.6 mA of supply current per channel. The OPA1611 and OPA1612 op amps are unity-gain stable and provide excellent dynamic behavior over a wide range of load conditions.
The dual version features completely independent circuitry for lowest crosstalk and freedom from interactions between channels, even when overdriven or overloaded.
Both the OPA1611 and OPA1612 are available in SOIC-8 packages and the OPA1612 is available in SON-8. These devices are specified from –40°C to +85°C.
OP Amp Dual GP R-R O/P ±18V 8-Pin SOIC Tube
