Z-Communications has today introduced a new RoHS compliant Fixed Frequency Synthesizer, model SFS10000C-LF in X-band. The SFS10000C-LF is a single frequency synthesizer that operates at 10 GHz and features a typical phase noise of -100 dBc/Hz @ 10 KHz offset and typical sideband spurs of -70 dBc.

The new V600ME31-LF operates from 2700 to 5400 MHz with a tuning voltage range of 0-24 Vdc. This octave tuning VCO features a typical phase noise of -107 dBc/Hz @ 100 kHz offset and an average tuning sensitivity of 140 MHz/V.

Z-Communications has raised performance standards to new heights through the introduction of the DRO Series of high performance oscillators. DRO oscillators are sure to meet the demands of any Up/Down Converter system requiring an ultra-low phase noise LO solution. The DRO Series of high frequency oscillators use high-Q dielectric resonators and are currently available at 8 to 12 GHz.

Z-Communications introduce a new high performance voltage controller oscillator, DRO8000A. The new high performance DRO8000A covers 8000 MHz within a tuning voltage range of 0-12 Vdc and is ideal for the test and measurement market.

Z-Communications has raised performance standards to new heights through the introduction of the DRO Series of high performance oscillators. DRO oscillators are sure to meet the demands of any Up/Down Converter system requiring an ultra-low phase noise LO solution. The DRO Series of high frequency oscillators use high-Q dielectric resonators and are currently available at 8 to 12 GHz.

Z-Communications announces a new RoHS compliant VCO model V846ME24-LF in the S-band. The V846ME24-LF operates at 3100 to 3500 MHz with a tuning voltage range of 1 to 12 Vdc and provides better than 1.1:1 tuning linearity.

Z-Communications has announced the launch of a new RoHS compliant Voltage Controlled Oscillator - model USSP1217-LF in the L-band. The USSP1217-LF operates at 1210 to 1230 MHz with a tuning voltage range of 0.5 to 3.0 Vdc. This miniaturized VCO features phase noise of -102 dBc/Hz @ 10 kHz offset while operating off a 3.3Vdc supply and typically drawing only 13mA of current.

Z-Communications, Inc. is once again displaying its engineering prowess in VCO technology by introducing the SMV5550B-LF. This high performance VCO generates frequencies between 5000 and 6000 MHz, covering the 1000 MHz bandwidth within 0 to 10 V of control. Even though the device covers a broad spectrum of bandwidth, the SMV5550B-LF comes in a compact package covering an area less than .10 sq. inches while exhibiting remarkably good phase noise p...

Z-Communications, Inc. announces a new RoHS compliant Voltage Controlled Oscillator model USSP2350-LF for mobile communication system applications where low power consumption and small package size are critical. The USSP2350-LF covers the frequency range of 2300-2400 MHz in 0.5 to 3.0V of tuning voltage. This high performance VCO comes available in a compact surface mount package measuring a mere 0.2 x 0.2 x 0.04 while operating off 2.7V and draw...

Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO3500C-LF in S-band. The CRO3500C-LF operates at 3500 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -111 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 5 MHz/V.

Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CLV1075A-LF in L-band. The CLV1075A-LF operates at 830-1300 MHz with a tuning voltage range of 0.5-17 Vdc. This VCO features a typical phase noise of -105 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 35 MHz/V.

Z-Communications announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model SMV3727A-LF in S-band. The SMV3727A-LF operates at 3710-3744 MHz with a tuning voltage range of 0.5-3 Vdc. This VCO features a typical phase noise of -83 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 142 MHz/V.

Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO2912A-LF in S-band. The CRO2912A-LF operates at 2875-2950 MHz with a tuning voltage range of 1-18 Vdc. This VCO features a typical phase noise of -113 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 9 MHz/V.

Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO3262B-LF in S-band. The CRO3262B-LF operates at 3261-3263 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -113 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 5 MHz/V.

Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO2211B-LF in S-band. The CRO2211B-LF operates at 2184-2238 MHz with a tuning voltage range of 0.5-4.5 Vdc.

Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model SMV5320A-LF in C-band. The SMV5320A-LF operates at 5245-5395 MHz with a tuning voltage range of 1-4 Vdc. This VCO features a typical phase noise of -81 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 170 MHz/V.

Z-Communications, Inc. announces a new RoHS compliant Voltage-Controlled Oscillator model V500ME03-LF in UHF-band. The V500ME03-LF operates at 500-1000 MHz with a tuning voltage range of 0-11 Vdc. This VCO features a typical phase noise of -105 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 54 MHz/V.

Z-Communications, Inc. announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CLV1020A-LF in L-band. The CLV1020A-LF operates at 960-1080 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -106 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 40 MHz/V.

Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model V585ME12-LF in L-Band. The V585ME12-LF operates at 1500-1900 MHz with a tuning voltage range of 0.8-20 Vdc. This VCO features a typical phase noise of -102 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 35 MHz/V.

Z-Communications, Inc. announces a new RoHS compliant VCO model CRO3150A-LF in S-band. The CRO3150A-LF operates at 3125-3175 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -108 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 21 MHz/V.