XP Power has announced the introduction of the LCS series of regulated output, convection cooled AC-DC power supplies that are well-suited to budget-conscious applications. The four new series (LCS35, LCS50, LCS75 and LCS100) offer power levels of 35, 50, 75 and 100W, respectively and feature class B conducted and radiated emissions for easy & low cost system integration along with an integrated connector cover to enhance safety once installe...

XP Power has announced the introduction of the PLS1500 series of 1,500W rated, 1U high, 19” rack-mount programmable DC power supplies. This latest extension complements the 600W PLS600 range for higher power equipment in a wide variety of OEM, industrial, and laboratory applications.

XP Power has announced a new range of 500W AC/DC power supplies that provide class II safety certification, including BF class insulation, for medical device applications requiring class II (without earth) installation and excellent EMC performance.

XP Power has announced the introduction of the SVR surface mount and VR through-hole, non-isolated DC/DC switching regulators. With efficiencies of up to 96% and operating temperatures of -40 to +85°C, the Point of Load (PoL) devices are ideal as replacements for low efficiency linear regulators.

XP Power has announced the release of the XP Glassman BQ series of 10kW, high voltage DC power supplies for OEM, industrial and laboratory organisations requiring controllable DC power from zero to 15kV through to zero to 100kV. The fast response units feature tight voltage regulation of better than 0.005% for line regulation and 0.01% for load. Up to five units can be connected in parallel in a master-slave configuration to produce up to 50kW.

XP Power has announced the release of three new series of DIN-rail mount AC/DC power supplies offering a compact, low profile and low-cost DIN rail solution for industrial electronics and controls and building management applications. The three new series (DRC30, DRC60 and DRC100) provide power levels of 30, 60 and 100W in an easy to integrate, lightweight package.

XP Power has announced the addition of a low-profile enclosure to their HPT5K0 series of high-power density, high efficiency, 5kW AC-DC power supply modules. In common with the existing products in the range, the new HPT5K0-L units feature a three-phase, three-wire & earth, 180 to 528VAC input and they carry ITE/industrial and medical agency approvals.

XP Power has announced the new ECH450 series of compact, high efficiency power supplies available in open frame or a range of enclosed formats.

XP Power has announced the availability of two new series of wide range input DC/DC converters. Their flexible specification allows devices with incompatible voltages to be easily integrated into industrial systems.

XP Power announces the availability of two new series of PCB mount single output AC/DC power supplies that offer a convenient and cost-effective solution for modern domestic, Internet of Things (IoT), and industrial tech applications.

XP Power has announced a new single output programmable DC power supply that is well suited for use in a wide variety of applications including laboratory, production, and embedded test & measurement. Multiple interfaces including USB, analogue, and LAN are built-in as standard, enhancing the flexibility and controllability of the unit.

XP Power announced the release of two new series of desktop power supplies that offer a highly efficient and low-cost solution for multiple applications. The new PSUs are ideally suited to provide the power, energy efficiency and cost requirements of increasingly capable modern industrial and technology equipment.  

XP Power has introduced two new series of wide input range chassis and DIN rail mount DC/DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The DTE06 and DTE10 DC/DC converters provide 6W and 10W of power and offer a 4:1 input range, giving a wide tolerance for fluctuating supplies. With nominal inputs of 12/24VDC and 24/48VDC the series cover inputs between 9.0VDC and 75.0VDC.

XP Power has released two series of external power supplies that are intended for modern medical applications, including safety approvals for home-based healthcare, and IT applications where energy efficiency and international safety approvals are critical.

XP Power has introduced a new medical power supplies guide that provides a wealth of useful information for design engineers seeking the optimum power solution for their project. The comprehensive guide provides an overview of XP Power in terms of their vision, core values, quality systems, manufacturing facilities and compliance regime so that customers can better understand the company behind the comprehensive range of medical power supplies.

A new range of 180W U-channel AC/DC power supplies has been launched by XP Power, intended for space-constrained medical (BF), industrial and IT applications. The low-profile devices are just 29.5mm high and occupy a small 107.6x62.8mm footprint, allowing them to be used in high-density designs.

A range of high-power density, high efficiency, resonant zero-voltage switching (ZVS) 5kW AC/DC power supplies have been announced by XP Power with the HPT5K0 series, with both ITE/industrial and medical agency approvals that feature a three-phase, three-wire, 180 to 528VAC input. This drastically simplifies installation as there is no need for a neutral connection, which is often not available in industrial applications.

A new range of 20 Watt DC/DC power modules with international agency approvals for medical/healthcare applications have been introduced by XP Power. The series is suitable for all medical applications and particularly intended for use where the DC/DC converter provides a reinforced (two MOPP) safety isolation barrier, including patient contact and patient vicinity applications.

Two new series of low-profile, open-frame power supplies addressing the need for low-cost 40W and 60W solutions that support a broad range of applications within the medical, domestic/household and ITE/industrial sectors have been launched by power solutions provider, XP Power. 

Featuring a power density of 26W/in3, XP Power’s SIP9 packaged, five watt rated, IMM05 converter occupies 65% less PCB area than other products and its very low 2uA leakage current makes it ideal for medical BF and CF applications. Approved for worldwide 60601-1 medical applications, the IMM05 features a 2:1 input range, 1500VAC isolation, and 1 X MOPP at 250Vrms.