Companies

Analog Devices

  • The Record Store 15 Pressing Lane Hayes Middlesex
    UB3 1EP
    United Kingdom
  • (44 1932) 358530
  • http://www.analog.com
  • (44 1932) 358555

Analog Devices (Nasdaq: ADI) is a leading global high-performance analog technology company dedicated to solving the toughest engineering challenges. We enable our customers to interpret the world around us by intelligently bridging the physical and digital with unmatched technologies that sense, measure, power, connect and interpret. We create innovative solutions to solve design challenges in instrumentation, automation, communications, healthcare, automotive and numerous other industries. The company is a global leader in the design and manufacturing of analog, mixed signal, and DSP integrated circuits to help solve the toughest engineering challenges.

Visit http://www.analog.com.

Analog Devices Articles

Displaying 421 - 440 of 1047
Design
13th November 2014
Rapid Prototyping Kit Simplifies Wide-Dynamic-Range GSPS Data Converter-to-FPGA Connectivity

Analog Devices, Inc unveiled a rapid prototyping kit today that simplifies wide-dynamic-range GSPS data converter-to-FPGA (field-programmable gate arrays) connectivity. Digital and analog designers can use the AD-FMCDAQ2-EBZ Rapid Prototyping Kit to quickly prototype the high-speed JEDEC JESD204B SerDes (serializer/de-serializer) GSPS data converter-to-FPGA interface on major FPGA platforms, including Xilinx’s UltraScale FPGA and Zynq All P...

Power
13th November 2014
Analog Devices Introduces Industry’s First Analog Fault Detection and Protection Switch Family for Analog Input/Output Modules in Harsh Environments

Analog Devices, Inc. today introduced a family of fault detection and protection, low/ultra-flat Ron switches: the ADG5412F, ADG5413F, ADG5412BF and ADG5413BF. By identifying when a channel is in a fault, this innovative switch technology removes the need for additional hardware and software error-detection schemes, leading to an improvement in system uptime.

Design
13th November 2014
Wireless sensor development kits enable deployment of industrial systems targeting the IoT & Big Data networks

Analog Devices has introduced a suite of comprehensive development kits enabling manufacturers of industrial equipment to easily add remote sensing and monitoring capabilities to their IoT and Big Data products via a scalable wireless network. The wireless sensor development kits significantly reduce the time and effort required to move designs from proof-of-concept to production release. The out-of-the-box kits allow engineers to establish a wor...

Power
6th November 2014
Op-amp is claimed to be industry's most robust

An operational amplifier, claimed to be the industry’s most robust, has been introduced by Analog Devices. The ADA4177-2 dual-channel amplifier integrates input protection against signal excursions of 32V beyond the supply rails and 70dB of rejection for EMI above 1GHz.

Mixed Signal/Analog
5th November 2014
Using a wideband balun with ADCs

Most high-speed ADCs use a differential input structure. This provides good common-mode noise rejection, but often requires a single-ended signal to be converted into a differential signal at the ADC input. A passive balun or transformer and an active amplifier are the main choices for the conversion process. By Ian Beavers, Analog Devices.

Analysis
3rd November 2014
ADI appoints Vice President of EMEA Sales

Mike Britchfield has been appointed to the position of Vice President of EMEA Sales at Analog Devices. To meet the needs of all customers, whether through ADI direct sales or distribution channels, Britchfield will manage an experienced sales network providing both technical support and customer service across the region.

Mixed Signal/Analog
30th October 2014
Demodulator maximises battery life of portable instruments

Utilising the company’s patent pending Sampled Analog Technology (SAT), the ADA2200 synchronous demodulator has been introduced by Analog Devices. Enabling designers of portable and low-power instrumentation to maximise battery life, the device features a configurable analogue filter. The filter also allows designers to perform precision magnitude and phase measurements on analogue signals in the presence of large noise sources.

Sensors
29th October 2014
Magnetic angle sensor directly measures motor position

Claimed to be the industry’s highest precision, highest speed magnetic angle sensor, the ADA4571 has been released by Analog Devices. According to the company, the device is four times more accurate (0.5° max), 60% faster and uses 40% less power than competing angle sensors. To reduce noise, optimise smoothness and torque performance, the sensor directly measures motor position. 

Communications
23rd October 2014
Automotive audio bus enables transceiver to deliver 50Mb/s

Capable of distributing audio and control data together with clock and power over a single, unshielded twisted-pair wire, a digital audio bus technology has been introduced by Analog Devices. Providing improved vehicle fuel efficiency while delivering high-fidelity audio, the Automotive Audio Bus (A²B) reduces the weight of existing cable harnesses.

Frequency
22nd October 2014
Ka-band upconverter & HPA operate from 29-31GHz

Suitable for use in single-carrier satellite communications, two Ka-band devices have been released by Analog Devices. Operating in the 29-31GHz frequency output range, the HMC7053 block upconverter and HMC7054 high-power amplifier (HPA) feature 60dBc spurious-free dynamic range performance. Meeting military environmental conditions, the devices cover both commercial and military bands.

Analysis
22nd October 2014
Understanding converter specifications: bandwidth first

When starting a new design, the first parameter that must be chosen is bandwidth. Three types of front ends can be used, depending on the application: baseband, bandpass (or super-Nyquist or narrowband) and wideband, as shown in the figure (left). By Rob Reeder, Senior System Application Engineer, Analog Devices.

Mixed Signal/Analog
16th October 2014
D/A converter slashes E-Band development costs

Analog Devices’ new 2.8-GSPS dual 16-bit converter is aimed at telecommunications system manufacturers that require microwave frequencies in point-to-point wireless backhaul equipment. The 16-bit AD9136 and 11-bit AD9135 dual D/A converters achieve up to 70 percent higher signal bandwidth than competing devices while enabling designers to support emerging E-band (71-76 GHz and 81-86 GHz) frequencies being adopted by wireless carriers to sup...

Events News
15th October 2014
Innovation at the 'Analog to Anywhere' Technology Pavilion

Analog Devices will be demonstrating innovative solutions and hosting a series of demonstrations from its 'Analog to Anywhere' Technology Pavilion. Helping customers anticipate and solve their toughest design challenges, the highlighted solutions will enable customers to speed development time.

Mixed Signal/Analog
8th October 2014
ADC clock input considerations

For optimum performance, an ADC’s sample clock inputs (CLK+ and CLK−) should be driven with a differential signal. This signal is typically AC-coupled to the CLK+ and CLK− pins via a transformer or capacitors. These pins are biased internally and require no additional biasing. By Ian Beavers, Staff Engineer, Analog Devices.

Mixed Signal/Analog
8th October 2014
ADC stakes claim as markets fastest & most accurate

Claimed to be the fastest, most accurate, lowest power A/D converter in the industry, the 16-bit AD7981 has been unveiled by Analog Devices. The company claims that the device is more than twice as fast as existing converters and provides error-free operation at temperatures of up to 175°C. The device, with sample rates up to 600-kSPS, scales power linearly using only 4.65 mW at a full speed of 600 kSPS and 70 µW at 10 kSPS. 

Power
25th September 2014
Amplifiers integrate DSP for improved power efficiency

Designed for high-speed data acquisition systems which require a high level of accuracy, precision and power efficiency, a family of rail-to-rail amplifiers have been introduced by Analog Devices. The 100MHz ADA4805-1 (single) and ADA4805-2 (dual) amplifiers feature DPS which allows users to manage power consumption by shutting-down the amplifier between ADC samples.

Mixed Signal/Analog
24th September 2014
High speed ADC driver delivers high accuracy at very low power

With best in class settling time, noise and distortion, the ADA4805 minimises the power consumption for portable and battery-powered high speed data acquisition systems without sacrificing the high performance requirement.

Communications
10th September 2014
Processors bring Hollywood sound to the home

Certified by Dolby Laboratories for the decoding of Dolby Atmos content, the SHARC 214xx family of processors have been launched by Analog Devices. The devices enable Dolby’s latest cinema audio surround processing technology to be implemented in AVR systems for the home theater market.

Sensors
4th September 2014
Industry’s first MEMS gyroscope to withstand +175°C

Improving the productivity of oil and gas drilling equipment, Analog Devices has introduced what is claimed to be the first and only MEMS gyroscope specified to withstand temperatures of up to +175°C. The ADXRS645 operates from a 5V supply and can operate at +175°C for a minimum of 1,000 hours.

Mixed Signal/Analog
28th August 2014
Multichannel ADCs suit battery-powered applications

Claimed to be the most power-efficient in their class, three ultra-low-power, multichannel, 12-bit, 1MSPS SAR ADCs have been unveiled by Analog Devices. The two, four and eight channel ADCs are designed for battery-powered applications including DAQ modules, handheld meters, field instruments, communications and medical devices such as portable electrocardiograms and heart rate monitors.

First Previous Page 22 of 53 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2025 Electronic Specifier