ABSOPULSE Electronics has introduced the PFHI 1K-FXW series of high input voltage, wide input range switched-mode power supplies with active power factor correction (PFC) designed for 1kW industrial applications.

ABSOPULSE Electronics has recently released the CSI 1K-24/230-3XD3-HSF, a 1kVA addition its line of IP66-rated DC/AC sine wave inverters with pure convection cooling. This 1kVA inverter is designed for applications where a suitable heatsinking surface is not available and only pure convection cooling is feasible.

ABSOPULSE Electronics has released the HVI 5K-3U7 series of high input voltage industrial DC/DC converters that deliver up to 5kW output power. A built-in redundancy diode allows for parallel connection of a number of 5kW converter units to create a 10kW, 15kW, or higher DC-power solution, and N+1 operation. The output separation diode also makes the units suitable for battery charging applications.

ABSOPULSE Electronics’ has released the HTH 1K-F6W, a three-phase high voltage AC/DC power supply designed for 1,000W industrial applications. The unit operates from a three-phase line input of 400Vac (340-446Vac range) and delivers a 200Vdc single output. Similar power supplies that operate from 380Vac or 480Vac three-phase sources are also available on request.

ABSOPULSE Electronics’ HVI 2K-F6W series of high input voltage DC/DC converters employ HVI2500 topology to deliver up to 2,000W output power. The converters are suitable for a range of industrial applications that require a rugged, reliable, DC power supply capable of accepting high input voltage and where size and weight are constraining factors.

ABSOPULSE Electronics has released the LQC 2K-3U2LC, a liquid cooled, industrial quality DC/DC converter that uses field-proven technology to deliver up to 2000W output power. The unit accepts an input of 600Vdc (400Vdc to 800Vdc range) and provides 24Vdc/80A output voltage.

ABSOPULSE Electronics’ CTPH 800-F7W series of high input voltage DC/AC inverters deliver up to 800VA three-phase pure sine wave output voltage. The inverters operate from a 700Vdc nominal input, 500 to 900Vdc operating range, 1,100Vdc peak, with a maximum start-up current of two amps.

It has been announced that ABSOPULSE Electronics has recently released the FCP 1K-F7W Series of compact, AC/AC frequency converters designed for rugged industrial applications that require universal AC-input voltage and split-phase AC-output with pure sine-wave output voltage.

The RWY 200-HSA-P2 series of fully encapsulated railway quality DC/DC converters with pure convection cooling have recently been released by ABSOPULSE Electronics. The 200W converters deliver a single, regulated output of 12, 24, 36, 48 or 110Vdc. They accept inputs of 24, 36, 48, 72 or 110Vdc with EN50155 wide input ranges.

The line of fully encapsulated RIA12 railway quality DC/DC converters from ABSOPULSE Electronics has recently been updated, with the RWR-350-P600 series. The units have an input voltage surge withstand capacity 3.5 times the nominal input voltage for 20 milliseconds and meet the requirements of RIA12 with wide margins.

ABSOPULSE Electronics has added its 1kVA addition to its line of compact, low profile DC-AC inverters with 3-phase pure sine output voltage. The use of the latest silicon carbide semiconductor technology contributes to 90% conversion efficiency at full load, ensuring high power density and significantly smaller size than earlier 3-phase 1kVA inverters. The inverters are typically used for testing 3-phase equipment in engineering labs, p...

ABSOPULSE Electronics has recently released the BUR 3K-P600, a compact, encapsulated, industrial grade, step-down DC/DC regulator that delivers up to 3000W output power. The unit steps a 600Vdc (400-800Vdc) input down to 300Vdc or similar voltage at very high efficiency. The use of the latest semiconductor technology contributes to 97-98% efficiency, allowing high power density in a compact 155 x 68.5 x 270 mm enclosure.

ABSOPULSE Electronics’ has announced the RSI 30-D1 series of railway quality sine wave inverters which deliver 30VA pure sine wave output voltage. The inverters meet the requirements of EN50155 for electronic equipment used on railway rolling stock. They employ microprocessor controlled high frequency PWM technology to convert 24, 48, 72, 96 or 110VDC, with wide EN50155 input ranges, to 115, 230VAC or custom outputs.

  The CSI 100-3W-F1 series of DC/AC inverters that deliver up to 100VA output power with pure sine wave output voltage, has recently been released by ABSOPULSE Electronics. The units offer an input range of 20-60VDC, which allows operation from 24, 36 and 48VDC input sources, all in a single unit.

Designer and manufacturer of heavy-duty switch-mode power conversion products for the automotive industry, ABSOPULSE Electronics, has released the HTP 1K-F6W, the most recent addition to its line of compact, three-phase, high input voltage AC/DC power supplies. The units operate from a 3-phase line input of either 400VAC (360-440VAC range) or 480VAC (430-530VAC range). The 1,000W supplies provide a single output of 24, 48, 125VDC or custom a...

The PDR 100R series has been added to ABSOPULSE Electronics’ line of fully encapsulated RIA12 DC/DC converters for railway applications. With an input voltage surge withstand capacity 3.5 times the nominal input voltage for 20ms, the converters meet RIA12 requirements for protection of traction and rolling stock equipment from transients and surges in DC control systems.

Designed for rugged industrial applications that require high input voltages and wide DC input ranges, ABSOPULSE Electronics has released its HVI 500-1K-XX-FX series of DC/DC converters. The converters accept a nominal input voltage of 1,000VDC with an 800-1,200VDC operating input range. The 500W units provide 36, 48, 110, 125VDC or custom outputs. An optional built-in redundancy diode allows for a number of units to be connected in parallel to a...

The DCR 30R-F0 series has recently been added to ABSOPULSE Electronics line of RIA12 railway quality DC/DC converters. The input voltage surge withstand capacity is 3.5 times greater than the nominal input voltage for 20 milliseconds, which ensures that the converters meet RIA12, the specification for the protection of traction and rolling stock equipment from transients and surges in DC control systems.

  ABSOPULSE Electronics has released the HHT 500-FX series of DC/DC converters designed for heavy duty industrial applications that require high DC-input voltage at high operating temperatures.

ABSOPULSE Electronics has recently released the PHR series of industrial quality AC/DC power supplies with active PFC-input. The units are designed and built for an operating life of up to 30 years and are ideal for environments where power supply repair or replacement is not feasible. The opto-less design features low component count, large design headroom, full electronic protection, 5000Vdc input to output isolation and heavy ruggedising which...